Second-hand machinery for sale (2,399)

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Dob Ha Rwov Hmdqs Seut Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: refurbished (used), Functionality: fully functional, center height: 175 mm, grinding length: 1,000 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 400 rpm, controller manufacturer: Fanuc, controller model: 0i-TF Plus, Completely overhauled cylindrical grinding machine Kellenberger R175x1000 CNC - unused since then! The machine was completely refitted in collaboration with Fanuc and includes: - New control cabinet and new circuit diagram - New CNC control Fanuc 0i-TF Plus - New servo motors and servo drives Fanuc Dusb Hovmqllea Rw Set - New balancing system Elaso with GAP - Grinding wheel loader  - Cooling tank with paper filtering - Geometry according to the Kellenberger protocol TECHNICAL DETAILS Control: Fanuc 0i-TF Plus Centre height: 175 mm  Centre distance: 1000 mm Speed: Workpiece spindle head: 20 - 400 rpm C-axis: available Programming: Programs can be created with G-codes or via the user-friendly interface Table angle shift: 8° (for long parts) Headstock inclination: 90° (for short parts that do not require a tailstock) Table speed: max. 10.0 m/min (infinitely variable) External grinding: possible Internal grinding: not possible Tip grinding: up to 6 different diameters on the same piece Taper grinding: the machine has a table that can be tilted up to 8 degrees for long parts, and for short parts that do not require a tailstock, the headstock can be tilted up to 90 degrees.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: AA2/003019, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,780 mm, travel distance Z-axis: 240 mm, number of slots in tool magazine: 10, TECHNICAL DETAILS Condition: Very good condition, little used Postprocessor: Available for Fusion360 CAM Machining size: 3,660 x 2,200 mm X-axis travel: 4,250 mm Y-axis travel: 2,780 mm Z-axis travel: 240 mm Movement speed Djb Ha Rsv E Hapjw Seut X-axis rapid traverse: 70 m/min Y-axis rapid traverse: 60 m/min Z-axis rapid traverse: 15 m/min Spindle and tool holder Electro-spindle motor power (S1): 8.5 kW Number of tool holders: 10 (without tools) MACHINE DETAILS Dimensions (L x W x H): approx. 7,000 x 6,000 x 2,700 mm Weight: approx. 5,500 kg Safety devices: Light barrier and barrier grid CE certificate: available Vacuum pumps: not included

Condition: good (used), Functionality: fully functional, Year of construction: 2018, operating hours: 1,685 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, Equipment: all wheel drive, No UVV-relevant defects! Dusb Haev D Itbj Rw Set Place of use: indoor, outdoor and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Load capacity at full reach: 1,000 kg Mast type: extendable Fuel type: diesel Engine: diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Own weight: 7,100 kg EQUIPMENT - 4x4 all-wheel drive - Off-road tires - All-wheel steering - Cabin with heating

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Deb Haov E Ibne Rw Sjut Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: good (used), Functionality: fully functional, Year of construction: 2023, operating hours: 154 h, Technical data: Air flow at pressure: 7 bar - 21.2 m³/min; 8.6 - 19.7 m³/min; 10.3 - 18 m³/min Maximum pressure: 12 bar Caterpillar diesel engine with 146 kW output Tank capacity: 420L Fuel consumption at full load (L/h): 36,3L Connections: 2x G2 and 1x G3/4 Additional equipment: AFTERCOOLER - an additional cooler for after-cooling the compressed air CYCLONE SEPARATOR - for separating condensate from the compressed air after cooling Dsb Ha Rsumv D New Sjut It is powered by a 6-cylinder Caterpillar engine with 146 kW. The M210 delivers an impressive 18 m³/min of compressed air at 10 bar. Even with a full fuel tank, the standard version weighs 3.7 tons, which makes it easier to transport as it is mounted on a two-axle chassis. Operating hours: 154 h CoC certificate for rapid approval: not available Warranty: 1 year (valid for Serbia, Croatia, Bosnia and Herzegovina, Montenegro, North Macedonia and Kosovo). Functional and in perfect condition!

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! Dob Hsv E Rkrea Rw Ssut TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,162 h, Functionality: fully functional, machine/vehicle number: 1108 000002 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Duob Hajv Exhxe Rw Sot Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 24,220 h Spindle hours: 19,162 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 14705, temperature: 42 °C, No reserve price - guaranteed sale at the highest bid! Djb Ha Rwsvnbr Ee Ssut TECHNICAL DETAILS Capacity: 12,000 bottles/hour Temperature range: 0-42 °C Equipment: Heat exchanger Ipros VT20V-12/CDSC-16 CE marking: Yes Voltage: 400 V Frequency: 50 Hz Power consumption: 8 kW Packaging form: Custom-made pallet Overall dimensions (metric): 5,000 x 2,500 x 1,800 mm - 2,000 kg

Condition: excellent (used), operating hours: 55,000 h, Functionality: fully functional, laser power: 3,000 W, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, workpiece diameter (max.): 140 mm, New laser unit in 2021. TECHNICAL DETAILS Material and workpiece sizes Round tube: 12 mm - 140 mm Square tube: min. 12 x 12 mm - max. 120 x 120 mm Rectangular, oval, semi-oval, elliptical tube: min. 10 x 12 mm - max. 140 x 100 mm Dueb Hasu U Eyno Rw Sjt Standard material: steel, stainless steel, aluminum alloys (others on request) Loading and unloading system Loadable bar length: 3,200 - 6,500 mm Bundle loader loading capacity: 4,000 kg Unloading length: 3,500 - 4,500 - 6,500 mm Control and drives Controlled axes with digital drive: No. 8 LT722D - No. 9 LT823D Digital CNC control: Siemens 840D Machining capability Max. machinable profile weight: 15 kg/m Cutting thickness steel: 8 mm Cutting thickness stainless steel: 5 mm Cutting thickness aluminum: 4 mm laser Laser hours: approx. 55,000 h Laser unit replaced: 2021 for 55,000 EUR The system is equipped with a Rofin Sinar Slab laser from the DC series, which enables optimum cutting quality with low consumption thanks to the following features - High beam coefficient (K > 0.9 - 0.8) - No moving parts, therefore very low maintenance costs - Minimal gas and power consumption

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head Debov E Hz He Ha Rw Sjut - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: like new (used), Year of construction: 2022, Lenght (transport): 9.02 m Height (transport): 3.45 m Width: 2.26 m Gross Weight (approx.): 9,026.5 Axle Weight (approx.): 8,119.3 kg Tongue Weight (approx.): 907.2 kg Duebotrf N Ss Ha Rw Sot Engine: Volvo Horsepower: 174 kW Fuel Capacity (tank): 333 liters Hydraulic oil: 238.5 liters Infeed Opening: 58,4x134,6 cm Screen Area: 8,413 square cm Brakes: Electric Towing arrangement: Pintle hitch Tires: (4) 235-75R-17.5H Tracks: Optional - 308 Caterpillar Undercarriage EQUIPMENT HIGHLIGHTS Sloped infeed walls for improved visibility - Variable speed infeed system consisting of live floor equipped with slat chain - Removal bottom infeed clean-out door - Hydraulically operated debris containment door - Heavy-duty, pinned rotor complete with (18) hammers and (18) replaceable inserts - Dual belt discharge consisting of primary aggregate belt conveyor discharge onto a secondary stacking conveyor. - NACD 11.5" triple plate clutch - Independent adjustable drive belt tensioner - Single, side-load grate system made of AR450 steel available in multiple hole sizes and pattern The machine is like new and only 40 hours have been completed. It has been used as a test machine. The owner offers a 1000 hours warranty! The price includes transport within a radius of up to 1000 km!

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, tank capacity: 1 l, controller manufacturer: Siemens, TECHNICAL DETAILS Filling volume: 0.1 - 1.0 liters Filling medium: for example sauces, dressings, spirits, dressings or mayonnaise Filling method: below-level filling to reduce foam formation Performance: 6,000 bottles per hour (at 250 ml) Filling stations: 16 Closure elements: 4 Control: Siemens Container compatibility: plastic and glass bottles Direction of travel: left to right EQUIPMENT Deb Hev Hp Swoa Rw Ssut - Filler - Capper - Cap sorting unit - Cap feeder

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,785 h, Functionality: fully functional, machine/vehicle number: 1108 000006 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Dsbsv Exgzj Ha Rw Seut Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 18,534 h Spindle hours: 17,785 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 61007465, clamping force: 3,000 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, injection pressure: 1,904 bar, injection weight: 476 g, opening stroke: 820 mm, Including robot - Wittmann W 731 X-axis: 800 mm Deb Ha Rwovzrp Ij Sout Y-axis: 1,400 mm Z-axis: 4,000 mm TECHNICAL DETAILS Clamping force: 3,000 kN Mold opening force (max.): 160 kN Moving platen pusher force (opening): 86 kN Moving platen pusher force (closing): 68 kN Mold platen size (H x V): 995 x 1,050 mm Column spacing (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum clear height: 1,150 mm Injection unit Screw diameter: 55 mm L/D ratio: 20 Injection pressure: 1,904 bar Injection volume: 523 cm³ Injection weight (PS): 476 g Injection rate: 428 cm³/s MACHINE DETAILS Machine dimensions (L x W x H): 5.97 x 2.04 x 2.36 m Total weight: 12.5 t

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 05.02.03.18, laser power: 3,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 612 mm, TECHNICAL DETAILS Travel path X: 3,050 mm Travel path Y: 1,530 mm Travel path Z: 612 mm Rotation axis: 360° Axis speed: 120 m/min Dujb Hasvzr Hao Rw Sst Rotary table Load capacity: 350 kg Diameter: 4,000 mm Laser system Laser power: 3,000 W Laser type: Ytterbium YLS-3000 MACHINE DETAILS Operating voltage: 400 V, 50 Hz Connection power: 70 kVA

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 570 023 4, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, table width: 500 mm, table length: 700 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Work table length: 700 mm Work table width: 500 mm Spindle Spindle speed (min.): 20 rpm Spindle speed (max.): 12,000 rpm Spindle motor power: 25,000 W Rapid traverse speed & feed rate X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min X-axis feed rate: 10 m/min Y-axis feed rate: 10 m/min Z-axis feed rate: 10 m/min MACHINE DETAILS Total height: 3,300 mm Total length: 4,600 mm Total width: 5,500 mm Total weight: 6,000 kg Deb Haev Exdme Rw Ssut Input voltage: 400 V Type of input current: three-phase Any vices, tool holders and chucks shown are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, injection weight: 1,506 g, mold height (min.): 425 mm, opening stroke: 760 mm, TECHNICAL DETAILS Control: Unilog B4 Clamping force: 4,500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing (H x V): 800 x 800 mm Mounting plates (H x V): 1,155 x 1,195 mm Mold opening stroke: 760 mm Robot interface: Euromap 12 Injection unit Duebjvzrn Do Ha Rw Sjt Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Machine dimensions (L x W x H): 8.3 x 1.9 x 2.4 m Total weight: 20,400 kg Oil tank capacity: 800 l

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 1,562 mm, travel distance Y-axis: 772 mm, travel distance Z-axis: 100 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Sheet size: max. 1,500 x 3,000 mm Travel paths: 1,562 x 772 x 100 mm Travel speed parallel to the axis / simultaneous: 100 / 140 m/min Sheet feed: From the back of the machine Table load: 70 kg/m² Laser (probably - not guaranteed) Model: Bylaser 2200 Cutting capacity steel: 8 mm Cutting capacity stainless steel: 6 mm Cutting capacity aluminum: 4 mm Deb Hasvzr Dfs Rw Ssut MACHINE DETAILS Total weight: 13.5 t

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Total machine Oil tank capacity: 180 l Dobov Exbls Ha Rw Sout Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 500 mm, injection weight: 250 g, opening stroke: 900 mm, Including robot - LR 100 TECHNICAL DETAILS Control: MC 4 with color monitor, integrated control panel and plate station Closing system: Fully hydraulic Screw diameter: 45 mm Suitable for: Thermoplastics Closing unit Closing force: 1,500 kN Clamping plates (H x V): 780 x 790 mm Dob Ha Rsvzrmgew Sjut Free space between the columns (H x V): 500 x 500 mm Maximum opening width: 900 mm Injection unit Screw diameter: 45 mm Injection volume: 275 cm³ Injection weight: 250 g Injection pressure: 1,878 bar Electro-hydraulic equipment Pump motor power: 30 kW Heating element power: 16 kW ROBOT - Krauss-Maffei linear robot LR 100 Load capacity: < 10 kg (gripper + drives + parts) Loading side: opposite the operator X-axis (stroke from mold): 550 mm (servo motor) Y-axis (vertical stroke with motor brake): 1,200 mm (servo motor) Z-axis (lateral stroke): 1,500 mm (servo motor) C-axis (folding axis for depositing): 0-90° (pneumatic) Torque (Md): 30 Nm Position measurement: encoder MACHINE DETAILS Net weight (with control cabinet): 7.1 t Machine dimensions (L x W x H): 4.66 x 1.51 x 2.19 m

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Travel paths X - Y - Z: 1,100 - 610 - 810 mm Dueb Hev Ew T Hja Rw Set CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,000 h, Functionality: fully functional, machine/vehicle number: 61012448, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 140 g, ejector stroke: 150 mm, opening stroke: 600 mm, TECHNICAL DETAILS Control: MC5 with color monitor, integrated control panel and 3 USB ports Screw diameter: 35 mm Design: Scuff protection for thermoplastics Non-return valve: Yes Dsb Ha Rwsvzrkfo Seut Nozzle: Open nozzle Clamping unit Mold clamping force: 1,100 kN Mold opening force: 70 kN Mounting plates (H x V): 745 x 770 mm Column spacing (H x V): 470 x 470 mm Mold opening stroke: 600 mm Mold height: 300 mm Plate opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection unit Screw diameter: 35 mm Injection pressure: 2,429 bar Injection volume: 154 cm³ Injection weight (HP): 140 g Screw revolutions (standard/option): 390 / 490 rpm MACHINE DETAILS Working hours: approx. 42,000 h Machine weight (with control cabinet): 5.8 t Machine dimensions (L x W x H): 4.5 x 1.6 x 2.1 m Pump motor power: 18 kW Heating power: 10.97 kW Cylinder heating zones: 5 Drying cycles according to Euromap: 1,850 / h Oil tank capacity: 489 l

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164225, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 450 mm, mold height (min.): 600 mm, plate width: 720 mm, TECHNICAL DETAILS Closure system: Hydraulic Dusb Hjvzrhdja Rw Sot Closure force: 600 kN Plate size (table size): 720 mm Distance between the columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar MACHINE DETAILS Total weight: 5,300 kg

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 7154 - 0118, clamping force: 800 kN, clearance between the columns: 750 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 600 mm, TECHNICAL DETAILS Control: NC 4 control, DIAS Closing system: Hydraulic Closing force: 800 kN Distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mold size (min.): 250 mm Bar width: 420 mm Dob Ha Rwovzrf Nj Ssut Maximum opening distance: 500 mm Maximum distance between plates: 750 mm Two-component system Horizontal system: Nitrided screw, diameter 18 mm Vertical system: Bimetallic screw, diameter 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating power: 8.8 kW Machine dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg EQUIPMENT - Two-component injection molding machine with hydraulic closing system - Complete machine history available