Second-hand machinery for sale (2,405)

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 12,000 mm, turning diameter over bed slide: 900 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, rotational speed (max.): 900 rpm, TECHNICAL DETAILS Speed range: 1 - 900 rpm Gear stage 1 speed range: 1 - 230 rpm Gear stage 2 speed range: 4 - 900 rpm Tool turret: 12-way with driven tools (Sauter) Holder: VDI50 Processing data Max. workpiece weight: 6,000 kg Bed width: 600 mm Turning length: 12,000 mm Turning diameter over bed: 900 mm Swing diameter over face slide: 530 mm Face slide displacement: 590 mm Tailstock quill diameter: 140 mm Tailstock quill stroke: 300 mm Tailstock inner taper: 171 metric type Lathe tool dimensions: 40 x 40 mm Feed rate X / Z: 20,000 mm/min Rapid traverse speed: 10 rpm Max. torque: 8,000 Nm Spindle bore: 165 mm Spindle head according to DIN 55027: size 15 Front bearing diameter: 235 mm MACHINE DETAILS Dkebevxin No Hk Iy Uel Length: 15,000 mm Width: 2,600 mm Height: 2,150 mm EQUIPMENT - Power chuck SWM, KNCS-N 500 with quick jaw change - Tailstock, quill Ø140, MK6, electrically movable, hydraulically clamped - Various clamping jaws, tool holders and driven tools - 2 hydraulic SMW steady rests SR5, Ø45-310 mm - 1 small steady rest - 1 large steady rest up to Ø510 mm - 1 revolving steady rest - 1 boring bar holder Ø150 x 600 mm - chip conveyor - preparation for extraction

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Dob Hkevr Tkue Iy Uekl Contents Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Average working range: 2.47 m³ Steam water volume: 0.70 m³ Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Condition: like new (used), Year of construction: 2018, operating hours: 397 h, Functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Hartford Plus 3, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 12, No reserve price - guaranteed sale at the highest bid! Debsv D I Apo Hk Iy Ujkl TECHNICAL DETAILS X-axis: 620 mm Y-axis: 420 mm Z-axis: 450 mm Spindle nose to table: 100 - 550 mm Control: Hartford Plus 3 Table size: 620 x 420 mm Max. table load: 300 kg Spindle mount: 40 INT Spindle speed: 12,000 rpm Tool slots: 12 pieces MACHINE DETAILS Part counter: 662 pieces Operating time: 397 h Connected load: 15 kVA Weight: 3,919 kg

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS Capacity: 3000 bottles/h Treatment time: 15.8 min Detergent quantity and concentration: 71 kg / 1.8 % Soaking tank volume: 3.983 m³ Soaking tank temperature: 70 °C Volume of rinse tank: 0.781 m³ Temperature of rinse tank: 40 °C Heating system: Steam, 6 bar Water consumption: 3.31 m³ Water pressure: 2 - 3 bar MACHINE DETAILS Dob Hkjtzcrvs Iy Uekl Machine dimensions: 5,365 x 3,110 x 2,875 mm Weight: 8.3 - 13.83 t Voltage: 400 V, 50 Hz Power consumption: 23 kVA Noise level: 85 dBA

Year of construction: 2018, operating hours: 1,256 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Dsb Hk Isnt T Auoy Uokl Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, Functionality: fully functional, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Dkjb Hksvy U R Es Iy Uol Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Sinumerik 840D pl, spindle speed (max.): 12,000 rpm, HIGHLIGHTS Coolant system = 1250 l Debevxh Ibe Hk Iy Ujkl TECHNICAL DETAILS Control type: CNC Control: Sinumerik 840D pl X-travel: 1000 mm Y-travel: 800 mm Z-travel: 800 mm B-axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine height: 3500 mm Distance spindle center - table: 150 mm Table dimensions (lxw): 500 x 630 mm Table load: 800 kg Max. workpiece weight: 40 kg Max. tool length: 650 mm Max. tool diameter: 325 mm Tool diameter when fully loaded: 100 mm Tool holder: HSK - 100 Spindle speed: 0 - 12000 rpm Rapid traverse: 60 m/min Coolant system: 1250 l MACHINE DETAILS Manufacturer: HÜLLER HILLE Type: NBH 170 Year of manufacture: 2008 Country of origin: Germany

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA Deb Hkovw Ag Ao Iy Ujkl EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Dkob Hkovyg Szo Iy Ujl Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Year of construction: 1989, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm Dkeb Hkjmxkzaj Iy Uol workpiece weight: max. 15.000 kg Support: 2 x vertical, 1 horizontal MACHINE DETAILS main drive: approx. 55 kW Total weight: approx. 56 t

Year of construction: 2019, operating hours: 1,370 h, Condition: excellent (used), Functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm Dsb Hsnt T Afek Iy Uokl spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Year of construction: 2016, operating hours: 4,901 h, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS turning diameter: max. 330 mm turning diameter: max. 210 mm turning length: 450mm Diameter of passage over facing slide: 260mm bar passage: 51 mm speed of rotation: 5000 rpm Control: Sinumerik 840 D ShopturnSiemens x-travel: 182,5 mm z-travel: 455 mm diameter of spindle bore: 68,5 mm spindle diameter in the front bearing: 100 mm Main spindle hydraulic chuck: Schunk ROTA NCKplus 210-52 spindle head: 140h5 Dkob Hk Ijl Ax T Ssy Uel output power 40% ED: 16,5 kW Output power at 100% load: 11kW Torque: max. 166.5 Nm rapid traverse in X and Z direction: 30 / 30m / min turret: 12 tools shank diameter: 30 mm tailstock movement hydraulic: 396mm Center taper: Mk 4 MACHINE DETAILS total power requirement: 21kW machine weight: approx. 3,2t machine dimensions: approx. 4,5 x 2,5 x 2,0m Operating time: 11205 h Operating time: 4901 h Detail counter: 62408 pieces

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,324 h, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 16,000 rpm, table load: 3,000 kg, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, HIGHLIGHTS - IKZ (internal cooling) - Milling spindle overhaul: motor winding, bearings, tool clamp (2022) - Chip conveyor AXA FSB400 (built in 2021) - Compressed air preparation renewed (2023) TECHNICAL DETAILS Control: HEIDENHAIN TNC 426/430 X-travel: 1,200 mm Y-travel: 850 mm Z-travel: 800 mm B-axis: ± 95° C-axis: 0.0001° Spindle speed: 0 - 16,000 rpm Drive power: 26 kW NC swivel rotary table: Ø 520 mm Table load: 3,000 kg Table clamping area: 2,300 x 980 mm Tool holder: HSK 63 Tool magazine: 20 slots Feed rate infinitely variable: 0 - 20,000 mm/min MACHINE DETAILS Total power requirement: 36 kW Machine weight: approx. 17 t Space requirement: approx. 5.4 x 4.4 x 3.1 m Operating hours: 33,325 h Program run: 10,355 h Dkobjvxhrme Hk Iy Uol Machine running time: 25,324 h

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 12030326, travel distance X-axis: 810 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, table width: 900 mm, table length: 400 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! 2024 serviced TECHNICAL DETAILS X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Spindle tip to table: 115 mm Spindle center to column: 425 mm Table Table size: 900 x 400 mm T-slots: 14 x 3 x 125 mm Max. table load: 300 kg Table height: 815 mm Feed rate X,Y axis: 36,000 mm/min Z axis: 30,000 mm/min Spindle Spindle taper: ISO SK40 Spindle speed: 10,000 rpm Motors Spindle motor power: 10 kW Servo motor power X,Y,Z: 2.3 / 2.3 / 3.3 kW Tool changer (ATC) Type: Arm Tool capacity: 24 tools Max. tool diameter: Ø 150 mm (with free adjacent positions) Max. tool weight: 7 kg Max. tool length: 300 mm Machine accuracy Positioning accuracy: ±0.005 / 1000 mm Repeatability: ±0.003 / 1000 mm MACHINE DETAILS Air pressure: 7 kg/cm² Energy requirement: 20 kW Dsb Hovupnbok Iy Uekl Machine dimensions (LxWxH): 3600 x 2000 x 2500 mm Machine weight: 3,500 kg Voltage and energy Voltage: 3-phase, 380-400 V AC Frequency: 50/60 Hz Total power: 20 kW Cable specifications: Main voltage and earth cable min. 8 mm² EQUIPMENT - Electronic handwheel - Fully enclosed splash guard - Powerful AC spindle motor - Steel telescopic covers for X, Y and Z axes - Halogen work lamp - Automatic central lubrication system - Control lamp - Spindle blow-out device - Screws and feet for leveling - Manual and parts list - Machine is sold without vice and tools

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar MACHINE DETAILS Rated power of the pump motor: 15 kW Djb Hkovpg T Dj Iy Ujkl Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller model: FANUC Series 16-M, workpiece weight (max.): 200 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 10, TECHNICAL DETAILS Travel X: 500 mm Travel Y: 380 mm Travel Z: 300 mm Rotary table: 650 x 380 mm Table load: 200 kg Dksb Hk Ievxg A Dsy Uel Max. tool weight: 2 kg Max. tool length: 120 - 200 mm Max. tool diameter: 65 mm Max. spindle speed: 8,000 rpm Tool change time: 1 s Tool holder: MAS BT30, MAS P30T-1 (45°) Number of tool positions in the magazine: 10 Tool changer: turret type (spindle independent of turret) Feed infinitely variable: 1-15000 mm/min Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 48 m/min Rapid traverse Z-axis: 48 m/min Positioning accuracy in one direction: 0.006 / 300 mm Positioning reproducibility: ± 0.002 mm MACHINE DETAILS Machine weight: approx. 1.7 t Machine length: 1,560 mm Machine width: 2,060 mm Machine height: 2,218 mm

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Dkjb Hk Iovpg Nfsy Ujl Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Condition: used, Year of construction: 2013, operating hours: 32,369 h, Functionality: fully functional, sheet thickness aluminum (max.): 6 mm, power: 75 kW (101.97 HP), travel distance X-axis: 6,200 mm, travel distance Y-axis: 2,100 mm, cutting capacity construction steel: 15 mm, cutting capacity stainless steel: 8 mm, Last maintenance including new PC in 04/2023 TECHNICAL DETAILS Control: 31ilb X-axis: 6200 mm Y-axis: 2100 mm Processing size: 6000 x 2000 mm Capacity: max. 4 kN Sheet thickness mild steel: 15 mm Sheet thickness stainless steel: 8 mm Sheet thickness aluminum: 6 mm Laser source: CO2 - 4 kW Deb Hk Iysvxgwns Uekl Switching table: available MACHINE DETAILS Voltage: 50 Hz - 400 V Electrical connection: IEC Weight: max. 25055 kg daN Power: 75 kW Machine type: 62-21 Cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 61009829, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection weight: 6,098 g, ejector force: 200 N, opening stroke: 2,100 mm, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Dksb Hk Ijvpg Iuey Uol

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 800 kg, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 Travel X: 6,000 mm Travel Y: 800 mm Travel Z: 600 mm Spindle mount: SK 50 Table load: 3,000 kg Workpiece weight: max. 800 kg Spindle speed: 20 - 9,000 rpm Torque: max. 165 Nm Deb Hkovxhhns Iy Uskl MACHINE DETAILS Main drive: 60 kW Machine weight: approx. 24 t

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 8,000 kN, screw diameter: 100 mm, injection pressure: 1,613 bar, opening stroke: 1,175 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Opening stroke: 1,175 mm Tool height (min./max.): 450 mm - 950 mm Dksb Hkjvpg E Ts Iy Uel Platform distance: 2,125 mm Clearance between columns: 1,310 mm x 1,210 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,613 bar Injection volume: 3,338 cc Weight of PS injection: 3,038 g Weight of PE injection: 2,370 g Plasticizing speed: 190 rpm EQUIPMENT 2 x hydraulic core 2 x air valve Euromap 67 for the robot

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 130XX, travel distance X-axis: 20,000 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 795 rpm, drilling depth: 1,400 mm, spindle motor power: 51,000 W, General overhaul in 2000 TECHNICAL DETAILS Support sleeve diameter: 390 mm X-travel: 20000 mm Drill spindle diameter: 150 mm Dkjbevw Atcs Hk Iy Usl Work spindle diameter: 1400 mm Milling spindle diameter: 240 mm Speed range - stepless: 2 - 795 rpm Stepless feed: 3 - 1800 mm/min Rapid traverse X-axis: 1800 m/min Rapid traverse Y-axis: 1400 m/min Creep speed: 75 mm/min Drive power - spindle motor: 51 kW Machine weight: approx. 100 t Drilling depth: 1400 mm

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 90859, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,400 mm, injection pressure: 1,632 bar, plate width: 1,690 mm, plate height: 1,960 mm, TECHNICAL DETAILS Control: UNILOG B4 Clamping force: 10,000 kN Column spacing (h x v): 1,120 mm x 1,400 mm Plate dimensions (h x v): 1,960 mm x 1,690 mm Installation height (min.): 550 mm Installation height (max.): 1,020 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering of the moving platen (D): 250 mm Centering of the fixed platen (D): 315 mm Injection system Screw diameter: 120 mm Injection volume: 5,655 cc Injection weight: 5,146 g Injection pressure: 1,632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min⁻¹ Dkeb Hk Iyjvpgxaj Usl Screw torque: 11,370 N·m MACHINE DETAILS Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg EQUIPMENT 2 x core on fixed platen, MOOG control. 2 x pneumatic mold nozzle control on fixed platen. 1 x hydraulic mold nozzle control on fixed platen. 2 x pneumatic blow-off valves on movable platen.

Condition: refurbished (used), Year of construction: 1990, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 110 mm, spindle speed (max.): 1,120 rpm, drilling depth: 800 mm, Retrofit took place in 2001 TECHNICAL DETAILS Control: Heidenhain control TNC 310 X-travel: 2,000 mm Y-travel: 1,600 mm Z-travel: 2,000 mm Drilling depth: 800 mm Table height: 1,050 mm Spindle diameter: 110 mm Djb Hksvwmc Uj Iy Uskl Spindle mount: ISO 50 Table dimensions (LxW): 1,400 x 16.00 mm Faceplate speed: 5.6 - 224 rpm Spindle speed: 5.6 - 1,120 rpm Metric thread feeds: 1.25 - 56 mm Drive power - spindle motor: 40 kW MACHINE DETAILS Machine weight: approx. 25 t Machine length: 6,950 mm Machine width: 4,685 mm Machine height: 3,885 mm EQUIPMENT - Facing slide - 13 inch thread feeds 1 1/8 - 28 Gg/1“

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 12,000 kN, screw diameter: 100 mm, clearance between the columns: 1,200 mm, injection weight: 4,363 g, New machine control TECHNICAL DETAILS Clamping force: 12,000 kN Distance between columns: 1,200 mm x 1,200 mm Minimum mold height: 500 mm Maximum mold height: 1,695 mm Distance between tables: 2,000 mm Injection unit Dkob Hkovpgwij Iy Uel Screw diameter: 100 mm (barrier screw) Injection volume: 4,800 cm³ Injection weight: 4,363 g Performance Pump motor power: 75 kW Heating power: 70 kW