Second-hand machinery for sale (2,359)

Condition: excellent (used), Year of construction: 2005, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: 0-250-04-2333, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 220 mm, TECHNICAL DATA Table length: 2750 mm table width: 1050 mm Workpiece thickness: 100 mm X-axis: 3310 mm Y-axis: 1735 mm Z-axis: 220 mm Tool holder: HSK-F 63 Magazine: 8-position plate Unit: 2 spindles Drill: (6+4) x 32 Djb Hsuh Uyqslp Rqsut X-axis speed: 60 m/min Y-axis speed: 50 m/min Z-axis speed: 20 m/min Standard compressed air quality: according to ISO 8573-1 quality class 3 Connection: R 1/2" Pressure in the supply line: 7 bar Compressed air consumption: approx. 100-200 l/min Suction connection: Ø 200 mm Height: 2110 mm Total extraction capacity: min. 3170 m³/h Air speed: min. 28 m/s Pressure loss: min. 2000 Pa MACHINE DETAILS Loading dimensions: 5400 x 2300 x 2400 mm Machine weight approx.: 3600 kg Protection class: IP53 Operating voltage: 3 x 400 Volt, ±5% Frequency: 50 Hz External power supply: 32 A Recommended fuse: 35 A Total connected load approx.: 17.5 kW FUNDAMENT Surface pressure: in the area of the support points 1.2 N/mm² Floor covering: concrete quality B25, compressive strength ≥ 200 mm

Condition: excellent (used), Functionality: fully functional, grinding length: 650 mm, grinding width: 400 mm, grinding height: 400 mm, table length: 850 mm, table width: 360 mm, grinding wheel width: 350 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Table dimensions: 850 x 360 mm Grinding area: 650 x 400 mm Grinding height: 400 mm Magnet size: 600 x 400 mm Grinding wheel dimensions: 350 x 40 x 52.7 mm Travel paths Travel paths x / y / z: 840 / 500 / 410 mm MACHINE DETAILS Dimensions: 4,000 x 3,000 x 2,500 mm Weight: 3 t Dusb Hlp Revuqzpeqot Connected load: 15 kW

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 605 mm, TECHNICAL DETAILS Year of manufacture: 2012 Year of installation: 2014 Control: Mitutoyo UC240 Software: Mitutoyo MCOSMOS-1 3.5 Dusb Hlpevmfmds Rqjt Probe: Renishaw PH10MQ/TP7 Measuring range X-axis: 905 mm Y-axis: 1,005 mm Z-axis: 605 mm Length measurement uncertainty ISO 10360 MPEE: 2.5 + 3.5L/1,000 µm (18 - 22 °C) Measuring table material: steel Mounting holes: M8 x 1.25 Scale system: Mitutoyo Linear Scales Resolution: 0.0001 mm Motorization Motors: DC motors with digital encoders Bearing of the measuring axes: linear guides EQUIPMENT - Renishaw PH10MQ with PHC10-2 (used) - Renishaw TP7 with optional ACR-3 (used) - Computer Workstation WIN 10 can also be purchased: - SP25M + FCR Rack instead of TP7 - PH10MQplus upgrade

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Line consists of: SCM Windor 100 SCM Superset NT Djbsvy Ahxs Hlp Rqjut SCM Profitech SCM Fleximat SCM Windor 100

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 500 mm, length stop: 3,200 mm, worktable length: 3,700 mm, TECHNICAL DETAILS Engine power: 13.59 HP / 10.0 kW Max. cutting height: 200 mm Max. cutting width: 1,250 mm Crosscut stop: 3,200 mm Dusb Hlp Rsvrzbboqst Format sliding table: 3,700 mm Max. circular saw blade diameter: 250 - 500 mm Circular saw table extension: up to 1,620 mm EQUIPMENT - Parallel stop: Yes, with digital display - LASER cutting line display: available - On and off switch: on the sliding table - Preventive Contact System (PCS®): available - Potential-free contact: for controlling extraction systems

Condition: good (used), Year of construction: 2017, operating hours: 25,790 h, Functionality: fully functional, laser power: 2,000 W, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 8 mm, working range: 6,500 mm, pipe diameter: 152 mm, Equipment: documentation/manual, safety light barrier, Pipe laser cutting system including LoadMaster and discharge station TECHNICAL DETAILS Laser power: 2,000 W (TruDisk 2001) Control: Siemens Sinumerik 840 D Djb Hlpevwb A Nj Rqsut Working area Pipe material length: 6,500 mm Envelope circle diameter: 152 mm Workpiece weight: 20 kg/m Finished part length: 1,500 m Max. speed: 170 m/min (steel), 120 m/min (stainless steel), 60 m/min (aluminum) Accuracy: +/- 0.1 mm Maximum sheet thicknesses Max. sheet thickness (steel): 8 mm Max. sheet thickness (stainless steel): 4 mm Max. sheet thickness (aluminum): 3 mm MACHINE DETAILS Width: 2,800 mm Length: 7,000 mm Height: 16,000 mm Weight: 17,000 kg Operating hours: 25,790 h (total) / 20,950 h (laser) Safety functions: Multi-beam light barriers, monitoring system for gas pressure, temperature and cooling water Protective cabin: With certified safety windows EQUIPMENT - Feed station with self-centering clamping jaws - Pipe support with automatically retractable pipe supports - Push-through chuck, self-centering parallel clamping rollers - High-precision drives with digital three-phase servo motors - LoadMaster Tube 6.5 m with bundle trough - Discharge station 3 m including scrap conveyor belt with container - Parts storage (includes belt table and belt table extension) - Closed beam guidance - NitroLine - FocusLine - External solid-state laser TruDisk 2001 with one LLK output and excitation via Pump diodes - Lens cutting head with 150 mm focal length - Clamping jaws (1 set) - Quick-change mold shells for round tubes up to 0 152 mm - Quick-change mold shells for rectangular tubes up to HK 85 mm - Quick-change mold shells for rectangular tubes up to HK 170 mm - Guide rollers for round and rectangular tubes (1 set) - SeamLine Tube with internal detection - PierceLine - Adaptive clamping technology - Feed station - Automatic setup - Tube diameter 15 mm LoadMaster Tube 6.5 m (12 mm semi-automatic via conveyor line) - Set of U-shaped mold shells

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-travel without gluing: 6,000 mm Deb Hlpsuh Uxao Rqsut X-travel with gluing: 5,000 mm Y-travel: 1300 mm Y-travel with main spindle + tool diameter 20 mm: 1630 mm Y-travel with gluing: 1450 mm Setup table: Dyna Poin BIMA 410 V Occupancy: 4 places Edge banding unit: available

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, turning diameter: 65 mm, TECHNICAL DETAILS Model: Quick-Tech T8 TWIN Machine type: Counter-rotating CNC mill-turn machining center Control system Control type: Mitsubishi M70 Spindle and chuck Bar capacity (main spindle): 60 mm Maximum turning diameter: 65 mm Maximum machining length (main spindle): 500 mm Chuck (main spindle): KK6-185E60B Spindle front (main spindle): ISO DIN A2-5 Maximum cutting diameter: 300 mm Hydraulic pressure (min./max.): 5/30 kgf/cm² Counter spindle Bar capacity (counter spindle): 30 mm Maximum machining length (counter spindle): 100 mm Chuck (counter spindle): 6ʺ 3-jaw chuck or KK5-173E/42B Spindle front (counter spindle): ISO A2-5 Bore (counter spindle): 30 mm Travel X-axis travel: 230 mm Z1-axis travel: 385 mm Z-axis travel: 400 mm Drive and motors Main spindle motor: Mitsubishi AC servo motor, 11 kW Dusb Hlpju D Awfs Rqst Counter spindle motor: Mitsubishi AC servo motor, 3.7 kW X-, Z-, Z1-axis motor: Mitsubishi AC servo motor, 1.5 kW Pump and coolant system Pump pressure: 15 kgf/cm², 100 cc/min Oil tank (slide lubrication): 2 l Cooler - max. coolant pressure: 5 kg System max. coolant flow: 67 l/min Dimensions and weight Length: 2,450/3,350 mm Width: 1,650 mm Height: 1,750 mm Weight: 3,950 kg

Condition: ready for operation (used), Year of construction: 1972, Functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 85 mm, center width: 5,000 mm, spindle speed (max.): 1,800 rpm, TECHNICAL DETAILS Speed range: 9 – 1,800 rpm Dobevurino Hlp Rqjut Motor power: 15 kW Spindle bore: 85 mm Chuck diameter: 500 mm Working area Turnover over bed: 620 mm Turnover over support: 320 mm Center distance: 5,000 mm MACHINE DETAILS Machine weight: approx. 10 t EQUIPMENT - 2 axes digital display - Face plate - 2 lynettes - Steel holder - Rapid traverse - 3 lattice boxes Accessories

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, TV work table for maximum versatility when clamping the workpieces Dujb Hlp Rovy Acveqst

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: C7004367, Year of construction: 2019, operating hours: 1,706 h, load capacity: 3,800 kg, lifting height: 13,800 mm, arm reach: 8,600 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and engine Engine: diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: all-wheel steering Tires Tires (VR/VL, HR/HL): approx. 75% Type: off-road tires MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Own weight: 8,900 kg Operating hours: 1,706 h (as of January 20, 2025) Previous owner: first owner Duob Hlevr Tdzjp Rqjt Visual condition: good Technical condition: good Place of use: inside, outside, Terrain Maintenance and inspections Last service: 11/2024 Last UVV inspection: 11/2024 UVV valid until: 11/2025 Condition: Without UVV-relevant defects EQUIPMENT - Tow bar - Heating - 4x4x4 drive - Kubota engine - Quick coupler - Level control - Supports - Merlo sideshift - All-wheel steering - Cab with heating

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, Functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Deb Hlp Rsvt Tyroqsut Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: new, Year of construction: 2018, Functionality: fully functional, conveying length: 1,58,000 mm, construction width: 6,000 mm, product height (max.): 450 mm, product height (min.): 50 mm, product length (max.): 800 mm, product length (min.): 300 mm, product width (max.): 600 mm, product width (min.): 200 mm, System only run in test mode No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS System: based on Interroll Crossbelt Sorter Horizontal ST 6160 – 6189 Transport length: 158 m Width: 6 m Infeed throughput: 2 x 2,500 transport units/hour Gross transport capacity: 7,270 carts/h Net transport capacity: 6,000 parts/h (with 3% double-shell and 85% efficiency) Transport speed: approx. 1.5 m/s Conveyed goods Suitable for: piece goods and tray transport / boxes and polybags Minimum dimensions (L x W x H): 300 x 200 x 50 mm Maximum dimensions (L x W x H): 800 x 600 x 450 mm Weight: 0.2 - 35 kg Carriage dimensions (L x W): 560 x 800 mm Carriage pitch: 726 mm Position of goods on sorter carriage: crosswise/longitudinally Height of top edge of sorter carriage: 800 mm above platform Sorter Curve radius: 3,000 mm Drive Drive type: bevel gear motor with frequency converter (SEW with Movifit) Number of drive motors: 3 Motor power: 4 x 2.2 kW Voltage: 400 V Cross belt carriage drive: Mechanical Dsb Hlovt Am Iep Rqeut Infeeds Number of infeed lines: 2 Components per infeed line: 2 transfer belts (0.75 kW) / 4 takeover belts (0.75 kW) / 1 belt merge (1.1 kW) End points Number of end points: 20 end points (12 end points available) Width of end points on the sorter: 2,250 to 2,400 mm Flaps per end point: 4 pieces MACHINE DETAILS Sorter height: 800 mm (top cross belt to bottom support foot) above platform/steel construction Temperature range: +5 °C to +45 °C Maximum humidity: 90% (non-condensing) Noise level: max. 72 dB(A) Compressed air supply Consumption: 10 m³/h at 6 bar Note: Compressor for compressed air supply not included in delivery EQUIPMENT - 4 x Sorter_Curve_R3000 - 4 x Sorter_Route_1000 - 2 x Sorter_Route_4813 - 2 x Sorter_Route_5290 - 20 x Sorter_Route_5800 - 2 x Sorter_Feed_1830 - 2 x Sorter_Feed_5200 - 12 x sorter_spiral slide - 12 x sorter_roller belts - 12 x sorter_sorting tables - no control included

Condition: like new (used), Year of construction: 2022, operating hours: 2,085 h, Functionality: fully functional, turning diameter: 240 mm, spindle motor power: 11,000 W, spindle speed (max.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 142 mm, travel distance Z-axis: 165 mm, Front set double-spindle turning center TECHNICAL DETAILS Turning diameter: 240 mm Spindle motor power: 11,000 W Spindle speed: 3,200 rpm Spindle bore: 90 mm Travel X-axis: 142 mm Z-axis: 165 mm Rapid traverse X-axis: 24,000 mm/min Z-axis: 24,000 mm/min Electrical specifications Type of input current: three-phase Spindles: 2 Turning heads: 2 Driven tools: Yes C-axis: Yes Linear robot: 2 Operating hours: 2,000 hours Version: FULL-FULL version Control: FANUC 0ITD Monitor: RAKU-RAKU MONITOR Dimensions and weight Overall height: 2,700 mm Dueb Hlpsu D Aw Ss Rqst Overall length: 3,590 mm Total width: 2,610 mm Total weight: 5,200 kg EQUIPMENT The machine is equipped with two side feeds, a collet chuck, a 3-jaw chuck and a chain conveyor. Documentation/Manual Infinitely variable speed adjustment

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Simulation positioning speed: 108 m/min Deb Hlpovura He Rqjut Positioning speed rotary axis: 360 °/s Smallest programmable path dimension: 0.01 mm or 0.01° Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 800 h, Functionality: fully functional, Pellet production line incl. controls consists of presses, conveyor belt, pellet cooler, vibrating screen, elevator, BigBag station and 2 x control cabinet TECHNICAL DETAILS Material: agricultural raw materials - e.g. straw/hay/alfalfa/biomass Capacity: 1000 - 1600 kg/h (depending on material) Presses: 2 Koller ring die pellet press 110 KW Lubrication: automatic central lubrication Moisture content: automatically controlled in the conditioner by means of a dosing pump and mist nozzle Deb Hlp Rjtwa Ineqeut Moisture measurement: Envea brand microwave sensor Cooling: pellet cooler with level sensors and automatic emptying Vibrating screen: with dust extraction Elevator capacity: 2 - 3 t/h Filling: BigBag filling station with dust extraction. EQUIPMENT - New pan grinder sets - matrices - warehouse

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: S99229101, volume flow: 4,776 m³/h, operating pressure: 7 bar, pressure (max.): 8.6 bar, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to collect the item on time by the end of February! Duebevu A Ihe Hlp Rqst TECHNICAL DETAILS Working pressure: 3.5 - 8.6 bar Effective working pressure: 7 bar Volume flow: 22.3 - 79.6 m³/min or 371 - 1,326 l/s Nominal speed: 2,050 rpm Sound pressure level: 77 dB(A) Dimensions: 4,060 x 2,120 x 2,400 mm Weight: 8,540 kg Connected load: 488 kW

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Loading modules: 1 module Processing modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnosis: available Programming: ISO code, simulation using CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to machining time, manual, with 3-axis handling or robot Part feed: Paternoster / stacking magazine Workpiece change (chip-to-chip time): approx. 6 s Axes Travel path X: 572 mm Travel path Y1/Y2: 322 mm Travel path Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N B-axis speed: 1,000 rpm C-axis speed: 500 rpm B-axis acceleration: 52 rad/s² C-axis acceleration: 90 rad/s² B-axis torque clamped: 1,000 Nm B-axis torque unclamped: 287 Nm C-axis torque clamped: 300 Nm C-axis torque unclamped: 187 Nm Work spindle Tool holder: HSK 40-A Outer diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% ED): 85 Nm Power (S6 45% ED): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Djbsvt Tw Ro Hlp Rqeut Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Activation: pneumatic, 6 bar Tool changer Tool disks: can be externally pre-equipped with location coding, diameter: Ø 290 mm Tools (2 disks with 12 spaces) per machining module: 22 Weight of tool disk: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. Tool diameter: 63 mm Max. tool diameter with free space: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. weight of tools on the disk: 15 kg Positioning time per tool step: 250 ms Tool holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Dimensions of the machine (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per processing module: approx. 4.5 t Weight per loading module: approx. 2.5 t Safety system Doors: Locking switches on all doors to the work area Axis control: Control of all axes with one controller CNC and PLC: integrated on one module Interfaces: sercos 16 Mbaud, Profibus DP, Ethernet Transformation: 5/6-axis transformation Tool correction: 3D tool path correction Look-ahead: up to 1,000 sets Connection values Current consumption: 60 A Power: 40 kVA Compressed air: min. 6 bar Voltage: 3 AC, 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 1999, operating hours: 16,780 h, Functionality: fully functional, machine/vehicle number: MMZO 175 132, product width (max.): 480 mm, product height (min.): 115 mm, product height (max.): 320 mm, product width (min.): 110 mm, TECHNICAL DETAILS Maximum size: 480 x 320 mm Minimum size: 110 x 115 mm Control PLC control: for setup and operating parameters Dusb Hlp Rjvvmlajqst Construction Feeder: 6 x type 1555 Cover feeder: 1x type 1529 Stapling block: Bravo with 4 heads type HK75 and 4 heads type HK45 Slant control: available Stapling control: available Spine thickness measurement: available Trimmer: type 361 with center cut device Belt delivery: available Stacker: type CS 14 Performance Speed: 11,000 pieces per hour Operating hours Counter reading: 16,780 h EQUIPMENT - 6 feeders type 1555 - 1 cover feeder type 1529 - Bravo stapling block with heads type HK75 and HK45 - Inclination controller and stitching controller - Spine thickness measurement and trimmer type 361 - Belt delivery and stacker type CS 14 - Compressors - Manuals - Accessories

Condition: excellent (used), operating hours: 50 h, Functionality: fully functional, travel distance X-axis: 1,475 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 225 mm, rotational speed (max.): 24,000 rpm, CNC continuous feed center with clamp drive in X direction and fixed portal design in Y direction (without tools) HIGHLIGHTS Pressure cylinder: For holding the workpiece at zero reference Height-adjustable workpiece support: Along the Y axis Manual pressure device: For workpiece guidance Stop reference cylinder: For workpiece referencing in X direction Single pick-up space: Ergonomic tool change 4-way linear changer: For the shortest changeover times and space for milling tools/units TECHNICAL DETAILS Drive: Digital drives (driven on one side) Travel path X: 1,475 mm Travel path Y: 1,550 mm Travel path Z: 225 mm Working area X / Y / Z: 3,500 / 950 / 80 mm Milling spindle: 12 kW (S6) Tool holder: HSK F63 Dsbjvrzrge Hlp Rqout Maximum speed: 24,000 rpm Machine software package: Woodflash Sensor measurement: workpiece length in X direction Drill head Model: DH 25 8H 1S Number of spindles: - 17 vertical spindles - 8 horizontal spindles - 1 grooving saw in X direction MACHINE DETAILS Operating hours: 50 h EQUIPMENT - CNC board - Tool database - Program editor - Control management for 2 workstations (1 machine workstation + 1 external workstation) - Wireless barcode readers - Second stop cylinder for workpieces larger than X = 1,400 mm - Extractable air cushion run-out table - Automatic central lubrication

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Duobovuq Uvs Hlp Rqot Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Dobsvt Tu Nj Hlp Rqjut Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: excellent (used), Functionality: fully functional, workpiece length (max.): 140 mm, TECHNICAL DETAILS Minimum workpiece length: 140 mm Chain feed: 8 + 20 m/min Aggregate equipment Cross-cut saw unit: available Radius scraper unit: available Dsb Hlpsvrzqce Rqjut Surface scraper: available Flush and radius milling unit: available Joining milling unit: available, with plunge-controlled diamond cutters Polishing unit: available Pressure unit: available Special functions End position damping: for cross-cut saw unit Pneumatic-mechanical insertion lock: available Spraying of release agent and cleaning agent: available Cutter equipment: 60 mm Glue and heating system Infrared heating lamp: available Glue basin: Teflon-coated

Condition: good (used), Year of construction: 2001, Functionality: fully functional, pressing force: 225 t, working length: 6,050 mm, TECHNICAL DETAILS Axes controlled: Y1, Y2, X, R, Z1, Z2 Pressure: 225 t Bending length: 6050 mm Control: CYBELEC DNC 1200 PS Dusb Hljvuq Naep Rqot Dimensions: 6,050 x 2,150 x 3,167 mm Total power requirement: 18.5 kW EQUIPMENT - 2 bending aids in front of the machine - 2 support arms in front of the machine - pneumatic tool clamping at the top - crowning, die shifting - foot switch Tool holder: - top: 26 mm EHT - bottom: 55 mm EHT Please note: This machine is an underfloor machine

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, pressing force: 225 t, bending length: 4,100 mm, controller manufacturer: Cybelec, TECHNICAL DETAILS Dueb Hlsvuq Ehop Rqst Pressure: max. 225 t Folding length: max. 4,100 mm Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg EQUIPMENT - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch