Second-hand machinery for sale (2,399)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: HFE 80-25 V021106, Machine was in use until May 2024 (not in full production, temporarily not in use) incl. many accessories TECHNICAL DETAILS Pressing force: 800 kN / 80 t Stroke: max. 200 mm bending length: 2570 mm Distance between the columns: 2125 mm Stand projection: 420 mm MACHINE DETAILS Dimensions: 3630 x 2450 x 2550 mm Weight: 5750 kg Rated current: 15.2 A Operating voltage: 400 V, 50 Hz Noise level: 75 dB(A) Dob Hn Iotr Ayxs D Ueut Power consumption: 9 kW

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: APF271056, TECHNICAL DETAILS Debeu Rdfko Hn I D Ueut Dryer type Type: Heat-regenerating adsorption dryer Mode of operation: Moisture removal through adsorption process Control: Smart cycle control algorithm for energy saving at partial load Performance and capacity Pressure dew point: -40 °C (optionally -70 °C) Pressure drop: Minimized by generous design of tank and piping Assembly and installation Base frame: All components assembled and fully wired, ready for installation EQUIPMENT Pressure dew point sensor Tank insulation Fan filter

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,680 h, Functionality: fully functional, turning diameter: 170 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, center width: 600 mm, TECHNICAL DETAILS Travel in X/Y/Z: 160 mm / - / 310 mm max. rod passage: DN 45 mm max. turning diameter: 170 mm Swing diameter over bed: 430 mm Center distance: 600 mm (spindle nose - center point) Dob Hnovbzr Es I D Ujut Main spindle max. speed: 0 - 6,300 rpm max. drive power: 11 kW max. torque: 70 Nm C-axis: available Tool turret Number of tool positions: 12 Driven tools: 6 max. speed: 0 - 5,000 rpm max. drive power: 4 kW max. torque: 16 Nm MACHINE DETAILS Machine switched on: 33,250 h Ready for operation / automatic: 30,652 h Production mode: 9,680 h Workpiece counter: 400,014 pieces Machine dimensions: 2,250 x 1,675 x 1,940 mm Bar feeder dimensions: 5,800 x 550 x 1,500 mm Weight: 3,300 kg EQUIPMENT - C-axis and tailstock - Tool turret with 12 positions, 6 of which are driven - Bar loader LNS 6.26 HS 4.4 (year of manufacture 2019) - Large tool package

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 97128, travel distance X-axis: 625 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, turning diameter: 250 mm, turning height: 200 mm, clamping diameter: 315 mm, TECHNICAL DETAILS Control: Siemens 840 D turning diameter: 250 mm Rotation diameter: 250 mm Turning height: 200 mm Dsbjuyi Ics Hn I D Uout Chuck diameter: 315 mm Travel distance X-travel: 625 mm Y-travel: +100 / -80 mm Z-travel: 250 mm Spindle Spindle speed (max.): 5,500 rpm Drive power of the synchronous spindle: 37.7 kW Max. Torque: 300 Nm Tool system Tool system: VDI 30 + 40 Machine bed Material: Hydropol (special concrete and steel) Typical components: Ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings, joint journals, MACHINE DETAILS Machine weight: approx. 8 tons Total power requirement: 37.7 kW Note: Machine is set up but not connected & can be inspected under power on request

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, spindle speed (min.): 120 rpm, spindle speed (max.): 1,275 rpm, lifting speed: 25 mm/s, feed length Z-axis: 500 mm, hone diameter: 56 mm, TECHNICAL DETAILS Control: Siemens PLC control S7, NAGEL honing spindle control MS-U3 Production capacity: 90 workpieces/h at 100 % capacity utilization Roundness: 0.006 mm / 0.012 mm Bore tolerance: 22.018 - 22.028 mm / 56.000 - 56.019 mm Surface roughness (Rz): 4 µm / 6.3 µm Honing time: 28 / 33 seconds Secondary time: 12 / 7 seconds Cycle time: 40 seconds Workpiece Type: Connecting rod, large and small eye Hardness: 100 - 130 HB Machining diameter: 22 - 26 mm Machining length: 20.8 - 20.23 mm Workpiece holder: clamped and held down Machining data Pre-machining: fine-turned Diameter: 21.99 - 22.01 mm / 55.95 - 55.99 mm Roundness: 0.007 mm / 0.01 mm Surface roughness (Ra): 6 - 8 / 8 - 12 µm Material allowance: 0.013 - 0.033 mm / 0.02 - 0.06 mm Tool type Tool type: Diamond, articulated rod Honing spindle Number of honing spindles: 2 Stroke length: 0 - 500 mm Stroke speed: 25 m/min (infinitely variable) Tool holder: top / bottom, infinitely adjustable Spindle speed: 425 - 1,275 rpm and 120 - 360 rpm Drive power Stroke drive power: 5.5 kW Spindle drive power: 3 kW / 4 kW Measuring technology Measuring system: electro-mechanical step expansion Air measuring device: 0.0005 - 0.08 mm MACHINE DETAILS Installation area / height: 6,200 x 3,900 / 4,300 mm Weight: approx. 8 t Color: machine light grey RAL 7035, control cabinet capri blue RAL 5019 Construction: Welded steel construction in panel construction. The uprights have been artificially aged to relieve stresses. Hydraulic equipment Hydraulic tank: 400 l Electrical equipment Operating voltage: 400 V, 50 Hz with neutral conductor Control voltage: DC 24 V Total connected load: 28 kW Standard: according to VDE 0113 Dueb Hnouyidks I D Ujt Note: Machine is set up but not connected & can be inspected under power on request

Year of construction: 1996, operating hours: 91,897 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS Dob Hn I Dslruxfo Uout x-way: 600 mm y-way: 560 mm z-way: 560 mm Control: Siemens MACHINE DETAILS supply voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA total power requirement: 12 kW Machine weight: approx. 10 t EQUIPMENT - 2 machine pallets - 1 probe

Year of construction: 2003, operating hours: 33,792 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28840003282, TECHNICAL DETAILS x-way: 800 mm y-way: 710 mm z-way: 710 mm B-axis: 360 Control: Siemens Sinumerik 840D number of pallets: 2 pallet size: 500 x 630 mm tool diameter: max. 120 mm Dsb Hnjlruquo I D Ujut tool holder: SK 50 Magazine: chain magazine with 62/90 places MACHINE DETAILS Machine weight: approx. 12.5 t (transport weight) height: 3,2 m space requirement: 6,0 x 6,5 m Rated power: 80 kVA Rated current: 120 A Operating voltage: 400 V / 50 Hz Compressed air: 6 bar

Year of construction: 2000, operating hours: 47,085 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS Duob Hn I Dolrupaj Uet supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Year of construction: 1989, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 5117.19, TECHNICAL DETAILS grinding diameter: 450 mm grinding length: 1600 mm center height: 225 mm control name: Siemens Sinumerik System3 speed: max. 2440 rpm center distance: 1750 mm resolution: 0,001 mm speed: 0,06 - 10000 mm/min cross slide: 180 mm feed rate: 0,01 - 5000 mm/min resolution: 0,0005 mm workpiece weight: max. 500 kg quill travel: 40 mm Straightness of surface line over 650 mm: 0.004 mm Roundness accuracy: 0.0005 mm MACHINE DETAILS Machine weight: approx. 7.3 t Dueb Hslnkfaon I D Uot total connected load: max. 22 kVA

Year of construction: 1996, Condition: good (used), Functionality: fully functional, machine/vehicle number: 009005005, TECHNICAL DETAILS working range: 2 - 200 mm bar length: 500 mm dressing speed: 500 rpm control: Siemens 840 C control wheel width: 400 mm control wheel bore: 152 mm regulating wheel diameter: 350 mm control wheel speed: 10-150 rpm Control wheel drive: 11,3 kW Dueb Hnolmm Evo I D Uot grinding wheel width: max. 400 mm grinding wheel diameter: max. 660 mm grinding wheel bore diameter: 304.8 mm grinding wheel speed: 63 m/s Grinding wheel drive: 45 kW MACHINE DETAILS weight: 10 t Connection: 400 V / 50 Hz / 3 phases Rated power: 115 kW

Year of construction: 1994, Condition: good (used), Functionality: fully functional, machine/vehicle number: 073000312, TECHNICAL DETAILS grinding diameter: max. 200 mm regulating wheel width: 400 mm grinding wheel width: max. 400 mm Djb Hn Islmmy Ue D Ujut Control name: Siemens 840 C Profile depth: max. 15 mm Gr. workpiece length plunge grinding: 500 mm drive grinding spindle: 50 kW regulating wheel speed: 10 - 150 1/min regulating wheel drive: 3 kW regulating wheel inclination: +2° / -6 ° peripheral speed: 31,5 / 63 m/sec MACHINE DETAILS machine weight: approx.10 t operating voltage: 400 V / 3 phases / 50 Hz rated current: 160 A

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,529 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, workpiece length (max.): 1,280 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Laser power: 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching force: 220 kN Compressed air connection: 7 ± 1 bar MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Dusb Hsum Udben I D Uet Machine operating time: 38,585 h Laser switch-on time: 21,529 Cutting time: 3,547 h

Condition: reconditioned (used), Year of construction: 2017, operating hours: 7,800 h, Functionality: fully functional, machine/vehicle number: 7383, travel distance X-axis: 700 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, controller manufacturer: Heidenhain, controller model: iTNC530 HSCI-FS, workpiece weight (max.): 350 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 60, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! High-speed milling center HSC 500 - 2024 workshop overhauled TECHNICAL DETAILS Travel range X x Y x Z: 700/590 x 580 x 360 mm Control: Heidenhain iTNC530 HSCI-FS Software: NC 606420 004 SP14 Milling spindle: Steptec HVC140-15/42 Speed: 42,000 rpm Machining area: 580 x 530 mm Table surface: 550 x 450 mm Workpiece weight: 350 kg Distance machine table - spindle nose: 520 mm Tool changer: HSK40 with 60 tool positions Workpiece measurement: Renisaw 0MP400 measuring probe Rapid traverse: 30 m/min MACHINE DETAILS Machine dimensions: 3,200 x 2,250 x 3,000 mm EQUIPMENT - Dust extraction preparation - Oil mist spraying device (minimum quantity lubrication) - Oil mist extraction Air nozzle adjustable Dueb Houcvu Sjn I D Ujt - Tool length measurement (Blum laser) - Additional lighting Electronic handwheel with enabling button - H.I.B cooling system, power 3 kW Length compensation, - temperature compensation (high-precision package)

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, opening width: 60 mm, working width: 2,800 mm, controller manufacturer: KUPER, controller model: PC 477, plate width: 2,700 mm, sheet width: 5,200 mm, The system is designed for processing MDF solid chipboard and lightweight boards, for example. Line control for all sub-machines is new! ASSEMBLY - Feeding - Brushing machine - Glue application machine - Disc roller conveyor with covering rake - Pre-laying belt - Covering belt - Continuous press - Stacking belt - Impact wall System was converted from oil to hot water in 2015. Duob Hotzcx Ajn I D Uot TECHNICAL DETAILS Brushing machine Lehbrink WL 40 Working width: 2800 mm Passage height: 60 mm Brush roller: 1 at the top and 1 at the bottom Motor: 2 x 280 V, 50 Hz Outfeed roller conveyor: driven, foldable Automatic height adjustment: automatic via servo motor Control: via the higher-level control system Glue spreader Hymmen KLM 2800 Roller length: 2800 mm Passage height: 100 mm Application rollers: 2 pieces, rubberized Diameter: 285 mm Dosing rollers: 2 pieces, rubberized and with dosing roller cooling Glue level regulation: by means of sensors (bracket installed) Height adjustment: automatic, by means of servo motor Control: via the higher-level control system Disc roller conveyor Length: approx. 1000 mm Width: approx. 2800 mm Discs: made of V2A, can be extended sideways Legerchen: automatic Pane pitch: approx. 180 mm Pane spacing: approx. 140 - 180 mm Support rake: automatic, with scraper ruler Pre-alignment station: crosswise for aligning the glued workpieces Design: Complete substructure in sturdy design with V2A trays underneath the disk rollers Query of laying depth: via light barrier Wemhöner VOF 3- 900/3 throughfeed press Loading belt: driven Length: approx. 5500 mm Width: approx. 2800 mm Design: upper piston design Plate size: 2700 x 5200 mm Heating medium: Hot water Temperature of pallets: 80 °C Structure: 1 floor = 2 steel plates Specific pressure film loading: approx. 6.4 kg/cm² Fault and double document protection: for the entire press, measuring sensor and output unit Pressure setting via menu: MDF solid chipboard and lightweight boards Cylinder switching: automatic Stacking Bürkle Stacking system length: approx. 5500 mm Stop stiffness: 1300 mm Protective panel feed: from the right Roll width: 800 mm Machine control KUPER PC 477 SIMATIC Panel PC: with 15" Touch TFT Color Display based on Windows XP embedded operating system. Programmable logic controller: programmed on SIMENS Step 7 Decentralized periphery of inputs and outputs: via Profibus LED display: all inputs and outputs Integrated line control: for contactless control of the processing units Interface: SIMENS input panels MACHINE DETAILS Dimensions: 5800 x 3450 x 2800 mm Height allowance oil tank: 400 mm Height allowance substructure: 200 mm Height allowance armored rollers: 140 mm Bidders are obliged to collect the vehicle by the end of July 2024.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 120K587, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,300 rpm, Equipment: chip conveyor, documentation/manual, Machine comes from the test laboratory of a marine gearbox manufacturer and has not been a production machine, therefore it has few operating hours. An exact reading is not possible as the machine is not under power TECHNICAL DETAILS Control: Heidenhain TNC426M/410M Travel X / Y / Z: 1020 / 600 / 560 mm Spindle speed: max. 10,300 rpm Spindle torque: max. 252 Nm Milling table size: 635 x 1,200 mm Workpiece weight: max. 1,000 kg T-slots: 6 x 18 mm H8 Feed rate per axis: 32 m/min Tool holder: BT40 Tool magazine size: 24 slots Tool diameter / length: 88 - 125 / 300 mm Dsb Hnet Tdylo I D Ueut Tool change time: 2.5 s Chip-to-chip time: 6 s MACHINE DETAILS Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Drive power: 39 kW Lubricant tank volume: 4L Coolant tank volume: 400L EQUIPMENT - Fully encapsulated work area with roof - Chip conveyor - Central oil lubrication - 3D probe - Handwheel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,000 h, Functionality: fully functional, TECHNICAL DETAILS x-path: 1270 mm y-path: 610 mm z-travel: 760 mm Spindle holder: SK 50 Spindle speed: 8000 rpm Spindle motor: 20/30 kW Torque at the spindle: 306 / 458 Nm Pallet size: 1,320 x 620 mm Table load: 1350 kg Pallet worktable load capacity: 900 kg Feed speed: 1 - 40,000 mm/min Tool changing device: 24 pos. CNC control: iTNC 530 HEIDENHAIN Djb Hn I Detwbpgj Usut MACHINE DETAILS Total power requirement: 35 kVA Machine weight: 10 (8 + 2) t Space requirement: 3.5 x 2.4 x 3.1 m Weight of the machine: 8000 kg Switch-on time: approx. 83,000 h Operating time: approx. 22,000 h Pallet changer dimensions: 2010 x 1550 x 2217 mm Pallet changer weight: approx. 1100 kg Chip conveyor dimensions: 4020 x 670 x 1400 mm Chip conveyor weight: 250 kg Filter station dimensions: 1640 x 900 x 1055 mm Filter station weight: 280 kg Coolant tank dimensions: 2055 x 1005 x 500 mm Coolant tank weight: 210 kg EQUIPMENT - CNC vertical machining center with 2-fold pallet changer - IKZ (internal coolant supply) - ILZ (internal blowing air) - MMS (minimum quantity lubrication) - 3D probe HEIDENHAIN - Direct path measuring system - Tool measurement RENISHAW TS 27R - chip conveyor

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 8FBEK18T-10385, Year of construction: 2016, operating hours: 19,769 h, load capacity: 1,800 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, Full functionality according to FEM-4.004 Maintained & tested battery with min. 95 % capacity Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 40% Driver's seat and seat belt as good as new New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Lifting capacity: 1,800 kg Lifting height: 3,300 mm Load center of gravity: 500 mm Mast type: Duplex Fork length: 1000 mm MACHINE DETAILS Operating hours: 19,768 h Length: 1,850 mm Overall width: 1,000 mm Overall height: 2,150 mm Front tires: solid rubber Rear tires: Solid rubber Tare weight: 2,475 kg + 790 kg battery Battery voltage: 48 V Dujb Hn Iet Di Aye D Uot Battery year of construction: 2020 (stock battery, few cycles) Battery capacity test: 99% Battery: 625 Ah EQUIPMENT - Sideshifter

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 10363, Year of construction: 2018, load capacity: 1,750 kg, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, tested and reconditioned according to FEM-4.004 (UVV) specifications. TECHNICAL DETAILS Drive type: GAS/LPG Lifting capacity: 1,750 kg Lifting height: 5,000 mm Load center of gravity: 500 mm Mast type: Triplex Lifting height: 5,000 mm Fork length: 1,200 mm MACHINE DETAILS Operating hours: 14,195 h Overall height: 2,200 mm Dead weight: approx. 3,070 kg Front tires: solid rubber Rear tires: Solid rubber Dsb Hot Dam Nen I D Ueut EQUIPMENT - Sideshift - Special equipment: Free lift

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: FN587504, Year of construction: 2018, operating hours: 8,085 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Full functionality according to FEM-4.004 Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 30% Driver's seat and seat belt as good as new New paintwork in original colors and with original stickers TECHNICAL DETAILS Drive type: Gas Lifting capacity: 2,500 kg Lifting height: 4,700 mm Load center of gravity: 500 mm Mast type: Triplex Fork length: 1,150 mm MACHINE DETAILS Operating hours: 8,085 h Overall height: 2,200 mm Dead weight: 4,111 kg Front tires: Solid rubber - non-marking Rear tires: Solid rubber - non-marking Duebet Dah Hj Hn I D Ust EQUIPMENT - Sideshift - Load protection grille - Front work lights - Rear rotating warning light

Year of construction: 2016, operating hours: 11,480 h, Condition: excellent (used), Functionality: fully functional, fuel type: gas, machine/vehicle number: FN524842, Conversion to sideshift or other attachments possible. - repaired and tested according to FEM4.004: UVV inspection up to date - workshop tested - optically professionally refurbished, as good as new - charger included TECHNICAL DETAILS type of drive: gas load capacity: 4500 kg load center: 500mm Operating hours: 11480 h Mast type: Duplex Lifting height: 3500 mm Fork length: 2000 mm MACHINE DETAILS overall height: 2500 mm dead weight: 6845kg Driving power: 59,0 kW EQUIPMENT Attachments: sideshift Special equipment: working lights front & rear , StVZO Front tires: Solid rubber Dueboi Hlrms Hn I D Uot Rear tires: Solid rubber

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 01160011581, turning diameter over cross slide: 420 mm, turning length: 635 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, tool mount: 30 mm, TECHNICAL DETAILS Control: Heidenhain EP 4290 TP Swing diameter over bed: 570 mm Swing diameter over face guide: 420 mm Face travel: 220 mm Longitudinal travel: 635 mm Tool holder (DIN 69880): 30 mm Duob Heufi D Een I D Uet Spindle speed: 25 - 5000 rpm Main spindle drive at 100% ED: 21 kW Torque: 240 Nm Tool turret: 12 positions, 6 of which are driven MACHINE DETAILS Dimensions without chip conveyor: 3210 x 1750 x 1750 mm Weight without chip conveyor: 5300 kg EQUIPMENT - Automatic sliding hood - Chip conveyor - Extraction unit - Measuring arm

Condition: ready for operation (used), Year of construction: 1997, operating hours: 77,341 h, Functionality: fully functional, table length: 2,740 mm, table width: 1,800 mm, pressing force: 315 t, ram stroke: 160 mm, TECHNICAL DETAILS Total pressing force: 315 t Stroke: 160 mm Adjustment: 100 mm Stroke at bottom, adjustment at top: 1,050 mm Debju Unl Te Hn I D Ueut Dimensions Distance between uprights L-R: 2,740 mm Distance between the uprights sideways: 1,500 mm Distance between the oil drip pans: 2,400 mm Table clamping surface: approx. 2,740 x 1,800 mm Ram clamping surface: approx. 2,400 x 1,700 mm Performance and speed Number of strokes: 10 - 60 min-¹ Control type: Siemens S5 MACHINE DETAILS Power requirement: 75.5 kW Operating hours: 77,341 h Height above floor: approx. 5,500 mm Dimensions (L x W x H): 5,400 x 3,300 x 5,700 mm Machine weight: approx. 80 t EQUIPMENT - Hydraulic tool clamping

Condition: excellent (used), Year of construction: 2015, operating hours: 4,162 h, Functionality: fully functional, turning diameter: 100 mm, spindle speed (max.): 7,000 rpm, bar diameter: 36 mm, TECHNICAL DETAILS Number of axes: 10 (X1 / Z1 / Y1 / C1 / X2 / Z2 / Y2 / C2 / X3 / Z3) Number of spindles: 2 Number of turrets: 2 Main spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. Diameter of the main spindle chuck: 100 mm Min. resolution C-axis: 0.001° Counter spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. machinable diameter: 100 mm Minimum C-axis resolution: 0.001° Turret head 1 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW Turret head 2 Number of positions: 12 Dujb Hn I Dsuv Eh Rs Uet Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW MACHINE DETAILS Supply voltage: 400 V Space requirement: 3,682 x 1,430 mm Height of the machine: 1,900 mm Weight of the machine: 5,000 kg Switch-on time: 6,602 h Operating time: 4,162 h EQUIPMENT - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Part removal - Counter spindle prepared for pneumatic chuck - Optional: It is possible to purchase a large number of clamping devices as well as fixed and driven tool holders in high quality. (to be seen on the last pictures)

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,610 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 32, TECHNICAL DETAILS Djb Hovwc Iysn I D Ujut Machine type: 6-axis plastic machining center Milling motor: 1 piece, 5-axis Sixth axis: Part plate (lathe) Control: OSAI with PC Working area: 1,300 x 2,610 mm Z-usable working height: 500 mm Vector speed: 85 m/min Table dimensions: 2,000 x 1,000 mm Tool change: 2 automatic tool changers Number of tool positions: 2 x 12 + 8 Holder: HSK F63

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 10857, installation height: 2,200 mm, pressing force: 315 t, table width: 2,500 mm, table length: 1,000 mm, ram stroke: 1,100 mm, TECHNICAL DETAILS Total pressing force: 315 t Dueb Hn Iju Unlgj D Ust Ejector force: 2 x 125 kN Ejector as hold-down device: 2 x 250 kN Stroke: 1,100 mm Tool weight on ram max.: 6,000 kg Installation height: 2,200 mm Table clamping surface: approx. 2,500 x 1,000 mm Ram clamping surface: approx. 2,500 x 1,000 mm Speeds Rapid traverse from: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s MACHINE DETAILS Power requirement: 158 kW Machine weight: approx. 44 t Height above floor: approx. 6,175 mm