Sandblasting unit

AUER ST 700

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table Fsdjgvkktspfx Adaopd - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Fpjdpfx Adsw E I Itjaod Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Fpjdsxr Umgspfx Adaod Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Machine vices not come. Fpsdpfxomnp D Ie Adasd

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) Fpsdpew Swplsfx Adajd · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Fjdpfx Adjrxcu Seajpd Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Fpodpfoqcuvwjx Adajd Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. Fpjdpfx Aorkmv Ssdaod CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with Fpjdpfxji Hg Iyo Adasd - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm Fodpfx Adswrp Dpoajpd - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg