End processing of offshore tubes

AXA HFB Z600

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT Dwodpsy Twa Ujfx Adrja

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t Dwjdsw Rf S Eepfx Adrja dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Djdpfsd Nw Ttjx Adrewa

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. Dwjdpspyg N Aofx Adrja In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm Dedpowzmpzjfx Adrjwa distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit Dedowh Sigjpfx Adrewa - Dielectric

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 TOOL PRESETS N. 2 SELF-CENTERING Dodpjwayv Esfx Adrjwa N. 7 HSK TOOLS

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Dwodjtqf Rzspfx Adrsa Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Dodpfotmugcox Adrswa Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: Djdpfxou Tkcls Adrjwa EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!