Accessories & spare parts for welding machines
448
Butt welders
21
Flame-Cutting machines
56
Laser cutting machines
214
Other welding machines & cutting equipment
229
Plasma cutting machines
185
Plasma cutting tools
51
Plate edge welding slanting machines
18
Projection welding machines
16
Robots
67
Spot welding machines
158
Water-jet cutting equipment and machines
47
Welding sets
621
Welding smoke suction
101
welding bench
474
Welding machines & cutting equipment offers
GENERAL
Cdtulsqkcv
Cutting thickness: max. 200 mm
track width: 5.000 mm
track length: 9.000 mm
cutting width: 2.500 mm
raceway height: 500 mm
table height: 700 mm
Supply voltage: 230 V
Frequency: 50/60 Hz ± 2
Power consumption: Approx. 3.5 kVA (machine)
Number of tools: 2 (plasma + oxygen fuel)
ENVIRONMENTAL CONDITIONS
Minimum temperature: 5° C (41° F)
Maximum temperature: 45° C (113° F)
Relative humidity: 10% to 85% (no condensation)
STANDARDS
EN 349, EN 614-1, EN 626-1, EN 953, EN 1037,...
TECHNICAL DETAILS:
Laser power: 4,000 watts
working area: 2.500 x 1.250 x 115 mm
Control: Simens Sinumerik 840 D
Cgt9hhrq2b
Operating hours: 71.989 / 61.740 / 37.000 h
(machine switch-on time / laser switch-on time / laser cutting time)
Max. Sheet thickness/piece: 15 mm
Max. Sheet thickness/VA: 6 mm
Max. sheet thickness Sheet thickness/AI: 5 mm
Max. Speed: 60 / 85 m/min
Length: 6.500 mm
Width: 5.900 mm
Height: 2.000 mm
Weight: 7.000 kg
Accuracy: +/- 0.1 mm
EQUIPMENT:
Closed machine fram...
1
TECHNICAL DETAILS:
Dimensions LxWxH: 2.400 x 1.200 x 150
net weight: 740 kg
Dvlkulb
load capacity (surface load): 4.000 kg
Load capacity per foot: 1,500 kg
Surface hardness: up to 750 Vickers
ACCESSORIES/EQUIPMENT:
Hole arrangement in 100 mm grid on the table top
parallel hole arrangement in 50 mm grid on the sides
holes with diameter of 22 mm
the table is made of high quality steel S355J2+N, plasma nitrided and BAR coated
Welding tables are standard equipped with scale
Protection against ru...
4
Entry-level fiber laser metal sheet&tube cutting machine
One machine with two uses. AT series cuts both metal sheets and metal tubes.
The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity.
Xusd3s0t
Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision
Fast air cutting efficiency increases by 37% when cutting carbon steel.
Fiber laser heads are able to detect jutting...
10
Welding wire roll diameter: 200 / 300mm
Welding wire roll weight: 5 / 15kg
Welding current setting range: 30 - 380A
Welding current switching stages: 3 x 10Anz.
100% duty cycle (10 min. at 40 °C) with welding current: 220A
60% duty cycle (10 min at 40°C) at welding current: 285A
Duty cycle (10 min at 40°C) at max. welding current: 30 / 380% / A
Max. power consumption: 221kVA
Mains connection / phases: 400 / 3V / ~
Mains frequency: 50/60Hz
Mains fuse slow: 32AT
Degree of Protection (IP): 21 S
Con...
7
neu / Vorführmaschine
2021
2456
Spanien
35800
32300
1
2.000 x 1.000 mm
HYPERTHERM Powermax 105
22 mm
20 mm
12 mm
105 A
80% ED, 94 A 100% ED A
2700 mm
2000 mm
1700 mm
900 kg
120 mm
40 m/min
70 kg/cm
Plasmasource HYPERTHERM Powermax 105 (air)
CNC control TexComputer with Touchscreen
CAD/CAM software GProCut incl. manual and automatic nesting,
with macros with standardshapes, file import by USB or WIFI
Z-axis with TCH(torch height control)
torch-collission-protectio...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
6
Manufacturer: Tecna
Power: 63 kVA
Spqkhta
Year of manufacture: 1995
Throat: 300 mm
14
FRONIUS circular welding machine FPA 2003
2x Fronius TIG power source TransPulsSynergic 2007 with water cooling
2x Fronius MAG MagicWave 2600 with water cooling
KD 4000 wire feeder
2x extraction arm
Complete goose system
Complete documentation
Arc protection curtain
Compact cell fully functional
Weight approx. 2200kg
length 360cm
width 240cm
2nfrs0ej
height 330cm
4
Entry-level fiber laser metal sheet&tube cutting machine
One machine with two uses. AT series cuts both metal sheets and metal tubes.
The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity.
Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision
Fast air cutting efficiency increases by 37% when cutting carbon steel.
Fiber laser heads are able to detect jutting obstacle...
5
Manufacturer: MITSUBISHI ELECTRIC CORPORATION.
Model: ML3015Ex(S2)-45CF-R.
Type: CO2;
Laser power: 4.5KW;
Year of production: 2017 ;
Head work range X/Y/Z axis (mm): 3100/1550/150;
Positioning repeatability (mm): /- 0.01 (X, Y axis);
Maximum sheet dimensions (mm): 3050 x 1525;
Control: LC30BX, 15” touchscreen, M700 control panel;
Machine weight (kg): 10700;
Resonator: CROSS-FLOW MITSUBISHI ELECTRIC, model ML45CF-R;
Cutting head: MITSUBISHI ELECTRIC PH-XS;
Reloading table: INTERTEX-MASCHINENBAU, ...
4
neu
ca. 14 - 16 Wochen ab Auf
Spanien
174900
4000x2000 mm
37 kW
Max. Materialstärken
200 mm
150 mm
120 mm
100 mm
150 mm
1
4000 mm
2000 mm
200 mm
60 m/min
20 m/min
+/- 0,05 mm/m
+/- 0,025 mm/m
6,4 m3
790 kg/m2
37 kW / 50 PS
4136 bar
4,1 l/min
THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS:
Structure of the machine that includes the cutting table and a bridge with a cutting head for
abrasive and pure water cutting.
Complete numeric contro...
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288
Buaudymqce
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and t...
6
Manufacturer: Tecna
Power: 63 kVA
Year of manufacture: 1995
Cgy2km7j00
Throat: 300 mm
Catalog No. : 4741
Type: IR-SA 840 M
Producer: Tiesse
Made in: 2006
Characteristic:
Table dimensions: 2410x930 mm
Height: 3300 mm
Width: 7000 mm
Bho030nryp
Length: 5600 mm
Equipment:
Robot KAWASAKI FA 06 E
C14 VK robot support
MIG welding equipment: Fronius Transpuls Sinergic 5000 Inverter
TIG welding equipment: Fronius Trans TIG 3000 DC
Welding torch: ROBO 455 S S
Fronius FK 4000 cooling unit
Burner support: Binzel MOD CAT CPL-M
Space for wire feed Fronius VR 1500 Euro 4R
Burner cl...
4
All-round sheet fiber laser metal cutting machine
Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands.
Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxyg...
current capacity: kVA
number of controlled axis:
workpiece weight: t
x-travel: 1500 mm
z-travel: 1300 mm
G8h7n3zbu
control: YASNAC XRC Steuerung
total power requirement: 3,3 kVA
Total weight, approx.: 3.200 kg
Welding robot plant consists of:
-welding machine - MIG-MAG
-robot
-2x switch cabinets (large and small)
-machine table
The machine is currently in the technical department.
7
Compact high vacuum unit that can be used as central vacuuum cleaner for cleaning or hand tool connection. Compressed air cleaned filter unit with timer control built together with side
channel blower in sound enclosed cabinet and mounted on
strong transport platform.
Plug & Play model HFU-F is with built-in frequency converter
and motor with thermal fuse.
HFU/HFU-F: Air volume: Max. 1,050m³/h - 50 Hz
Max.1,275m³/h - 60 Hz
Vacuum: Max. 32,000Pa - 50 Hz
Max. 35,000Pa - 60 hz
Filter area: 13...
1
table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 555This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
Catalog No. : 5788
Type: MC10L-01
Producer: NACHI
Made in: 2015
Characteristic:
Control system: NACHI FD11
Total station hours 1: 45 h
Total station hours 2: 21 h
Number of axes: 6 pcs
P9nh2
Welding radius: 2019 mm
Source: ESAB AristoMig U5000i
Accuracy: 0.06 mm
Load capacity in the 3rd axis: 15 kG
Load capacity in the wrist: 10 kg
Protection: IP65
Robot travel path: 12000 mm
Load capacity of the positioner with support tailstock: 1500 kg
Frame length of the 1st station: 6000 mm
Fr...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950 mmtable length: 1950weight approx.: 358This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proc...
15
Catalog No. : 6019
Type: EVDR 330
Producer: Elektrovýroba a montáže s.r.o.
Fcbkmap
Made in: 2008
Characteristic:
Control system: Ripast 401 (Wrykrys)
Length of the working table: 6000 mm
Width of the working table: 2000 mm
Number of heads with gas burners: 3 pcs
Maximum thickness of the cut sheet metal: 300 mm
Total power demand: 750 W
Machine height: 2000 mm
Machine length: 7600 mm
Machine width: 3700 mm
1
table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proce...
3
Control system: Nesting
Length of the working table: 3000 mm
Width of the working table: 1500 mm
Bjtm8bg0go
Maximum thickness of the cut sheet metal: 24 mm
Plasma equipment: Powermax 65
1
table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
6
Catalog No. : 6020
Type: TruLaser 3060
Producer: Trumpf
Made in: 2008
Characteristic:
Total hours: 55.750 h
Gox0x7f
Laser power: 4 kW
Length of the working table: 6000 mm
Width of the working table: 2000 mm
Maximum thickness of the cut sheet metal: 20 mm
Source: TruFlow 4000
Equipment:
Pipe cutting (profile max. 414 mm)
Load Master
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1480 x 1480 x 650 bis 1050table width: 1480table length: 1480weight approx.: 464This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proce...
1
table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 733This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
1
table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
1
table height: 650 - 1050messurements (LxWxH): 2980 x 1480 x 650 bis 1050mmtable width: 1480table length: 2980weight approx.: 945This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
1
table height: 800messurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 630This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, ...
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332
Bub77jjrom
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices ...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 425This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 490This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 602This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, ...
1
table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 850
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...