Nitrogen generator

Azot jeneratörü NGS-1350

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in Gedpfx Aoy Sf Azsp Dobu • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Gsdpfx Apsv Nqppj Djbu Can send a video of the machine, via whatsapp.

Condition: good (used), Year of construction: 1998, pressing force: 150 t, stroke length: 215 mm, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Gedpfx Ajuc Txzop Djbu Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.

Year of construction: 2019, condition: new, Brand NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of construction: Unused Weight (kg) approx 11360 Made in China Comments Single packed or wrapped, packed in cartons by multiple pieces Selling condition Selling as full quantity only Gjdpfx Apeqa An Uo Djbu

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. Gedpfx Aeu Ttf Nep Dsbu The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Gbedpfxjthuzpe Ap Deu - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Gbjdeyu Undspfx Ap Dju Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Godpsn Htktsfx Ap Dsbu

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming Gjdperbz T Nofx Ap Debu - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Gbedpfxowmlknj Ap Deu Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *