Used tool milling machines - univ.conv. 400-499mm X-axis travel for sale (45)

Condition: reconditioned (used), Tool milling machine: Deckel Gedpfozcdarex Akajkb Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometrical overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 min-1 Feed rates: (18) 8 - 400 mm/min Head swiveling: 180° Equipment: - Geometry report - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Gkedpfxsylawxo Akaob

Condition: not inspected (used), functionality: unexamined, Universal tool milling machine Gkjdpfx Akjzvyihsasb

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm Gkodpfx Aoig A Erjkasb total power requirement / kW weight of the machine ca. 950 KG

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Gksdjwid Spspfx Akasb Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Gkedpfxjx Hkd Te Akasb Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Gsdpfxsw Evq Ao Akaskb Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Gkedpfx Akstrybgeaeb Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. 16 spindle speeds vert.: 60 - 2040 rpm. 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, Dear Sir or Madam, Gksdpjzldnaefx Akajb We are offering a Deckel FP2 Aktiv for sale. This newer model stands out primarily due to its stepless speed control with Heidenhain Aktiv control, which makes operation very easy and extremely comfortable. The machine has been thoroughly inspected in our workshop and is in very good condition. You are welcome to inspect it on-site. Delivery time: Available immediately Machine no. 2202-xxxx Table: fixed angular table or swivel-tilt table Travel: X400mm/Y220mm/Z400mm Drive power: 3KW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis digital display Heidenhain, stepless feed control in all 3 axes, Heidenhain digital display with Aktiv control, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We will gladly take care of shipping and/or installation

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Gedpfx Aozruudekaokb

Condition: good (used), Year of construction: 1980, Mikron WF2 milling machine with a 3-axis Heidenhain digital display. Fixed angular table, SK 40 spindle mount. In good, operational condition, from a precision engineering workshop. Machine can be demonstrated under power by arrangement. Godpfozq R Ahex Akaokb

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Godpfx Aeumclaekaokb

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Gksdpfx Akjxv D Uzjaob Machine can be viewed under power by prior appointment

Condition: used, functionality: fully functional, stepless feed rates in all axes 18 speeds 35 - 2200 rpm Gksdpfx Aszkypdekaob ISO 40 tool holder Travel ranges: X-axis 400 mm Y-axis 300 mm Z-axis 350 mm ISO 40 tool holder

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Gedpfxjzac Sbj Akajkb

Condition: good (used), Year of construction: 2006, Universal tool milling machine Gsdpfeichr Sjx Akaskb Manufacturer: KNUHT, Type: WF 5, Year: 2006, with 3-axis digital readouts, stepless feeds, and hydraulic tool clamping. Table size: 800 mm x 300 mm, maximum load capacity: 350 kg. Travel distances: X/Y/Z 450/400/320 Spindle connection: ISO 40 Spindle speeds: 63 - 3150 rpm Stepless feeds: 5-1250 mm/min Rapid traverse: 1800 mm/min Space required: 1.7 m x 1.7 m x 1.9 m, weight: approx. 1800 kg. Machine documentation available, machine ready for demonstration and in working order.

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Manufacturer: DECKEL Gedpfxefzk Hfe Akaekb Model: FP 2 Aktiv Year of manufacture: 1983 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue Machine no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with warranty Geometric inspection with test report Accessories: - 3-axis Active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating manual - used, as is -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine No.: 6976 with warranty Gkjdpfod Tytyex Akasb Geometric inspection with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual -used, as is-

Condition: reconditioned (used), Year of construction: 1978, Universal milling machine Manufacturer: DECKEL Model: FP 2, stepless Year of manufacture: 1978 - overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2202-10147 with warranty Gkodpofcqfpefx Akajb Geometric inspection with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating manual - used, as is -

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, type of input current: three-phase, rotational speed (max.): 4,200 rpm, rotational speed (min.): 60 rpm, overall weight: 1,000 kg, Equipment: rotational speed infinitely variable, Very well-maintained machine with a table size of 1070 x 230 mm, including various tool holders, a workpiece clamp, and steplessly adjustable speed with left and right rotation, as well as forward and backward feed. Main spindle mount: ISO-30. Gksdpozkb Tksfx Akajb

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Gedpfx Akexu Uvtoajkb

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Gkjdoxbx R Uspfx Akaob

Condition: excellent (used), Year of construction: 2007, operating hours: 7,576 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 255 mm, table length: 885 mm, table width: 320 mm, overall weight: 2,500 kg, table load: 250 kg, Fehlmann Picomax 55 CNC 2/3 Milling Machine The machine is fully functional and in very good technical condition. We purchased it a year ago from a company that owned it from new and always serviced it at the official Fehlmann service center. We are selling it solely because we do not have enough SF32 tool holders. Control: Heidenhain 530. The machine is equipped with a measuring probe. Axis travels: X: 500 mm Y: 255 mm Z (manual quill): 160 mm Gedpfx Aksyzt Abeaekb Z (programmable quill): 147 mm W axis: 500 mm Table surface: 885 x 320 mm Spindle speed range: 50 – 9,000 rpm Tool holder: SF32 Table load: max. 250 kg Spindle power (S6, 40%): 9.9 kW Machine weight: approx. 2,500 kg Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm The machine is in very good condition and the spindle has less than 10,000 operating hours.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Gkedpfx Akjx Hr Dzoaeb Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, Gedpfey Exaysx Akaskb We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you