50.000 liter fuel oil tank / oil tank

BARTH

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Djdpfxehui D Ee Aptocl The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 100.000 Liters Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Dodpfx Aetqdxfoptjcl MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: new, Year of construction: 2026, Max. lifting capacity: 330 kg Multiplex board, 1245 x 740 mm Dodpfxobygv No Aptecl Height adjustment: 475 to 1070 mm

Condition: new, Year of construction: 2026, Max. lifting capacity 400 kg Worktop: birch multiplex Dcjdsyrc Duepfx Aptel Worktop size: 1245 x 740 x 24 mm with recessed grips Height adjustment: 480 - 1070 mm

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 SEALING IN WORKING CONDITION 2 UNITS AVAILABLE Dsdpfxerk Eqvo Aptecl

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass, or a drying container with a user-defined air volume, instead of running a fan at full speed and incurring the associated costs. This Karl Barth AG Ventomat SE-1-100-4p was purchased in December 2025 and used for approximately four months. It operates perfectly and is offered as a complete, ready-to-use system, including more than just the fan: a factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reducer, plus a free 10m Ø400mm fabric hose. Original purchase price approximately CHF 8,507. Djdpfxjzrzize Aptscl Only one unit available – sold as a complete set with the inverter, ducting accessories, and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers, and agricultural ventilation where controlling air volume is preferred over continuous full-speed operation. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specifications mean in practice: • 5.5 kW motor, 4 kW rated fan output – sized for continuous hay/biomass drying, not short bursts. • Factory-configured Invertek Optidrive E3 inverter – adjusts air volume to the crop and its moisture content, reducing energy consumption. • Inverter in IP66/NEMA4X enclosure with disconnect switch – can be mounted in a dusty barn without a separate control cabinet. • Duct cone 222/563 to D400mm and D750/D600mm reducer – connects to existing ductwork without requiring custom fabrication. • 10m Ø400mm flexible fabric hose included – allows flexible positioning of the fan and ducting to where needed. • Painted sheet metal, single-suction Swiss-made (Karl Barth AG) – durable and locally supported. Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reducer D750/D600 with flange ring, and a 10m Ø400mm fabric hose – all at no extra charge. Purchasing and configuring the inverter alone represents a significant additional cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reducer Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 including VAT. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: purchased in Dec 2025, used ~4 months for hay drying/drying container, technically flawless. The inverter can be demonstrated in operation under load; nameplate photos and a running video are available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as a complete set – the fan, inverter, cone, reducer, and hose remain together. Once sold, this configuration will not be available at this price again. First-buyer bonus: free functional test with the inverter under load, plus loading assistance, at no extra cost. Valid until September 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Year of construction: 1950, condition: ready for operation (used), functionality: fully functional, Coffee Roaster GW Barth Sirocco 200 for sale in Poland Convection ball roaster suitable for coffee, cocoa, or nuts. From 1900, GW Barth Ludwigsburg & Co GmbH (now Bühler Group) was one of the world’s leading manufacturers of roasting machines, especially for chocolate manufacturers, where many Siroccos are still in production today. Indeed, mostly made of cast iron, these robustly built machines are durable and can be considered efficient production tools when updated with recent technologies, as is the case with the one we are selling. Dcjdpfx Apjy Ua Hystol Whether you are roasting coffee or cocoa, the forced hot air system combined with the ball drum of the Sirocco will guarantee the most homogeneous results and allow you to avoid the most common roasting defects that you might encounter when the flame hits the drum. Technical details: Capacity of 100-120 kg per batch, depending on the density of the product. Roasting time: 15-20 minutes. Voltage: 3x400VAC. Estimated year of manufacture: circa 1950. Condition: fully regenerated and refurbished, in perfect working condition, ready to install and operate. Including: Coffee roaster with cooling tray. Cyclone for exhaust air. Electric cabinet with Siemens PLC. The video shown displays the exact machine we are offering; the video was recorded during the initial trial roasting after refurbishment.

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Dodpfxjnfu Dyj Aptjcl Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 20,000 liters Diameter: 2,000 mm Length: approx. 6,860 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Dsdpfsvm Uttox Aptscl Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit switch, and complete tank fittings consisting of: - Filling pipe 3" with TW coupling - Level gauge pipe 1" with level gauge rod - Suction combination with suction line (1 1/2" or 2") - 1 vent stub 2" with vent cap The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Djdpfx Aoguzhcjptocl The tank can be painted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. We also offer trade-in and purchase of tanks/containers; please contact us for more information. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized Dsdpfx Asrgzv Neptocl * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): 100,000 liter fire water tank for underground storage, single- or double-walled, 1 manhole DN 600 with a blank cover including gasket and screws, externally with bitumen insulation - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B without a gauging port. Furthermore, the tank has a ventilation flange with a cap in nominal width/DN 100 with a total length of approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - The tank is emptied, cleaned and has been given a bitumen outer coating in our factory. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. Dodpfx Asi Enwvsptecl We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also accept trade-ins and purchase tanks/containers; simply contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Length: approx. 9,940 mm Diameter: approx. 2,000 mm Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: Dcjdpfx Apovmz Hajtel - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” Dodpfsh Ukupox Aptscl -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. Dcedpfx Apjvm Urvotol The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 16,000 liters Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst