Gear motor 1.5 kW 32/1420 rpm

Bauknecht RF1,5/4-72mg

Condition: good (used), three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm Gvsz3O -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Condition: used, power: 0,18 kW Tauhkuwh for edge banding machine Homag type KL 37 DS or similar.

Condition: ready for operation (used), Bauknecht ATB 18,5/2-75 Motor,used, strong signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Uuh0Sdkrwl

Condition: used, Electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type R 4.5/4-71r -Power: 4.0 kW -Speed: 1390 rpm -Shaft: Ø 30 x 110 mm -Design: B3 -Protection class: IP 44 Hu2Xm2G -Dimensions: 470/335/H270mm -Weight: 62 kg

Condition: used, Electric motor, three-phase motor -Spare part: a CNC lathe -Power: 11/15 kW -Speed: 1460/2900 rpm Qkoqshgwb -with electric clutch: 24 V and V-belt pulley -Construction: B5 -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type RF 15 / 4-75 from press brake EHT type EHP 11-40 -Power: 15 kW -Speed: 1460 rpm Bvonxcxux3 -Shaft: Ø 42 x 110 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 630/368 / H348 mm -Weight: 137 kg

Condition: used, Three-phase motor, electric motor 9Biioe9Oj -Power: 4 kW -Speed: 2900 rpm - Shaft: O 28 x 60 mm -Rezess: O180 mm -Pitch circle: O215 mm -Longitudinal hole spacing: 140 mm -Hole distance across: 190 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 380/300 / H250 mm -Weight: 33 kg

Condition: used, Electric motor, three-phase motor Bdcdwhtush -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Condition: used, Electric motor, three-phase motor -Power: 4 kW Bt0Kdwwm -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, overall weight: 3,000 kg, operating pressure: 6 bar, power: 37 kW (50.31 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Donaldson Torit dust collector, type DFO 4-32. dust extractor separator Dust extraction for all types of dry dust, welding fume extraction. manufacturer: DONALDSON TORIT DFO 4-32R year of manufacture: 2015 Ultra Web® filtration area: 564.8 m² 7500-21300m3/h 6300-4600 pa Automatic pulse filter cleaning ASCO Donaldson TCB "total control board" Flow rate between 16-20400m3/h number of oval filter cartridges: 32 filter cartridge type:DONALDSON DFO 2625175 Oval cartridge filter Ultra-Web Spunbond antistatic material, 289 x 365 mm outer diameter x 660 mm long centrifugal fan: 37kw ATEX air delivery: 7500-21300m3/h 6300-4600 pa mounted platform with railing, ladder for maintenance. T7Efcbi7E height: 4200 mm + cyclone ca 2000mm width: 2200mm length: 2200mm weight: 2200kg

Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, table extension, Bqxgci0T extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: used, Year of construction: 2004, Working width: 510 mm Working height max: 254 mm Number of knives: 4 Length planing table: 2.250 mm Stop tiltable by: 45 ° Depth of cut of the planer: 8 mm Depth of cut of the thicknesser max: 8 mm Qfcopoiec Number of feed-out rollers: 1 Main motor power: 5,5 kW Feedrate max: 16 m/min Continuously variable feed: Yes Protection cover: Yes Table rollers: Yes Height adjustment: electro-motive Cutter block: Barke/Brück Table tilting: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 860 kg Space requirement Length: 2,3 m Space requirement Width: 1 m Space requirement Height: 1,1 m

Condition: excellent (used), PART NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of workpiece 15 / 50mm 3 spindles: 1) horizontal bottom 11kW 2) horizontal top 22kW (7000rpm) 3) horizontal lower 5.5kW diameter of spindles 40mm - spindle 1 and 3 manually adjustable up/down, right/left - spindle 2 manually adjustable right/left - spindle 2 electrically adjustable up/down Bqakjqgmme - spindle 2 and 3 are equipped with brakes top: - 3 infeed, pulling, metal toothed rollers - 1 double infeed, pulling, rubber roller from below: - pressure on the introduction - corrugated top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of the feed speed 6-24m/min - feed motor 3kW - feed on cardan rollers - length of the input table 1970mm - automatic system of table top lubrication - diameter of the exhaust stub 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ATTRIBUTES - made in Germany - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: 175900 PLN Net price: 39977 EUR Net price calculated at the rate of 4.4 PLN/EUR (with major exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Tmv8Ybo3S Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Bka09Wjg7Uw Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package Hjrpitp 6 packages available 95 Euro per package

Condition: used, Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, swivel control panel, program memory, automatic pressure bridge adjustment, Feed by means of transport chain, extendable workpiece support, diamond milling cutter in synchronized and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, GLUEBOX, pressure unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be tilted pneumatically, Flush / radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, Corner copying unit with diamond-coated cutter, Radius scraper, Radius scraper with motorized positioning control surface scraper, insert-controlled surface scraper, infeed stop, Release agent spraying device, Lubricant spraying device, Cleaning agent spraying device, Year of manufacture 2022 ----- Technical data ----- Edge thickness of rolls: 0.4 - 3 mm, Edge thickness of strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. Workpiece length: 140 mm, Bsmdnbchkls feed speed: 10 m/min, Screen diagonal: 15 inch, Dimensions of jointing cutter: D 80 x 64 mm, Power of jointing cutter: 1.1 kW, Cross-cut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg

Condition: excellent (used), Year of construction: 2010, Technical data Vertical cutting height 2,200 mm Horizontal cutting height 2,080 mm Extraction connection 2 x 100 mm Dppvq7 Width [mm] 1,700 mm Height 3,000 mm Length [mm] 6,570 mm Motor power 7.5 HP (5.5 kW) Motor voltage 3 x 400 V Saw blade diameter 300 mm Cutting length 5,300 mm Cutting depth 80 mm Digital display for horizontal and vertical cuts Year of manufacture 2010 Net price €14,500

Condition: good (used), Year of construction: 2010, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Bn3Za3M8Ynw

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : Dqxsun The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam Hpxtgozo chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm B2Gj0Pgwlv 120 pieces in package 2 packages available 95 Euro per package

Condition: excellent (used), PART NUMBER 6651 TECHNICAL DATA - max width of workpiece 220mm - max height of workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 220mm 5.5kW - all spindles adjustable up/down, right/left - diameter of spindles 40mm - from top 4 pulling input shafts, toothed including 2 double ones - from top 1 pulling out roller , smooth, rubber - bottom rubber trailing outfeed roller - pneumatically pressed rollers C7H7Vlakm - feed on cardan rollers - feed motor 1.1kW - lifting motor 0.37kW - electrical adjustment of planing thickness - length of the input table 1980mm - side pressure - stepless adjustment of feeding speed 8-16m/min - central lubrication - diameter of the exhaust stub 5x140mm - closed in the cabin - dimensions L/W/H 3400x1500x1700mm - weight about 1670kg Net price: 39900 PLN Net price: 9060 EUR Net price calculated according to exchange rate 4,40 PLN/EUR (with greater fluctuations in the exchange rate, the price may change)

Condition: good (used), Year of construction: 2007, laser power: 4,000 W, TruLaser 3030. Year 2007. 4KW resonator Dqvi2P

Condition: repair required (used), Year of construction: 2014, Functionality: not functional, machine/vehicle number: 200.12.006.14, We are selling the following DAMAGED machine on behalf of and for the account of the person concerned, under our terms of sale known to you, for the highest bid. When placing a bid, the terms of sale of Battermann & Tillery GmbH, Bremen, are accepted. The machine is sold "as is" in its actual damaged condition - no warranty or guarantee! Tilted, used edge banding machine - Manufacturer: FORMAT 4, type Perfect 812 Dqwnen - Year of manufacture: 2014 - Serial number: 200.12.006.14 - Previous use: 25,984 linear meters of edge length Damage: When lifting and moving out of the storage rack, the machine was lifted too far, whereupon it hit the upper shelf strut and fell with its back in the middle onto one of the steel supports of the shelf. The rear paneling shows mechanical damage in the form of impacts with deformations and scratches to varying degrees of paint. Three wooden panels were clamped on the processing side to demonstrate the irregularities found. The two outer panels were fixed and could not be moved, although the middle panel could be moved with very little effort. This indicated a distortion of the base frame, and during the inspection the guide rollers of the material feed were moved to different positions several times. A different flattening of the feed wheels was observed. The difference was several millimeters. Furthermore, the rollers were at different distances from the frame. The distances varied by around 3 mm from the side of the material feed to the middle to the other side. Loose units can be seen inside the system, with some of them being able to move in the guide rails in the opposite direction to the normal direction of travel. The units were no longer aligned with each other.