Scissors lifting table

Beck Maschinenbau GmbH TMH 6000 Sonderbau

Year of construction: 1992, condition: used, Vollmer Saw blade shearing machine type NS 700 Knsdokmnyfopfx Af Sod Year 1992

Condition: new, 80000 kg length 12000 mm width 3000 mm height 1100 mm lenkbar Ksdpfxefrzwqj Af Ssnd lenkbar size of tyres 540 / 300 2-fach mm dimensions 13,6 x 3,0 x 1,1 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us.

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 75 kW Rotor-width: 600 mm Working-width: 1000 mm Rotor with 5 blade-rows Kjdpfxjckg Nzs Af Send 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, pipes, profiles, barrels,...

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated Knodpfx Afjtynpxo Ssd - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: new, Year of construction: 2022, Protec welding rotary table 10000 Kg load capacity Speed infinitely variable 0,05 - 0,5 rpm Kedpfx Ajd An Aisf Sond hand and foot remote control height 650mm diameter 1800mm

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Kjdpfx Afjb Nrbnj Send Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Year of construction: 1976, condition: excellent (used), Full frame saw / frame saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75HP, 380V, 50Hz max. passage 710 mm stroke: 500 mm Knodpfxspyglis Af Sjd with splitting wedge Marathon 2 very good condition - available immediately Location: Austria, near Feldkirch

Year of construction: 2002, condition: like new (used), L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm Knsdsllvpzopfx Af Sed capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Knedpefg E Hpsfx Af Sod Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment Knjdpfx Afjw Rc H Hj Sed - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm