Servo motor 0.52 kW 6000/49 rpm

Beckhoff SEW AM3031-0C00-0000

Condition: good (used), 3 machine vices Goody. Lhjdpfx Aksrai Akemsn

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Lhedofz U S Ejpfx Akmsn All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Lhodpfx Aket Awm Djmjn Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line - used - year of manufacture: 1995-96 - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations - length: 7.70 m - stainless steel construction Lhedpfxsyglg Uj Akmsn - manual control - machine from production - complete overhaul available on request - ex stock - price on request

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Lhodpfoxy R Ezsx Akmsn

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Ljdpszrniuofx Akmohn Machine is in good condition. Parts shown by hand not come.

Condition: ready for operation (used), functionality: fully functional, first registration: 06/2021, fuel type: gasoline, color: yellow, Year of construction: 2021, operating hours: 150 h, Equipment: all wheel drive, cable winch, Spider 2SGS large area mower and Ljdpfx Astv Rmfjkmohn embankment mower with radio remote control incl. cable winch, bought in mid-2021, first owner, 150bh service recently new, operating instructions + all documentation included, remote control plus 2 times battery, I have only mowed with the mower in the solar park, nothing else. The mower runs great, no complaints. Just call if you have any questions

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Factory-refurbished with manufacturer certification and a two-year warranty! Lhodjrm Imnopfx Akmsn The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm - Machine components and software are up to date with the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: ready for operation (used), Width: 1000 mm Lhodpfx Akjgq Nawjmon Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight:

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Lhodpfx Akevfm I Homsn Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.