CNC Lathe

BENZINGER GOFuture B1

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Hjdpfx Agoyn Nkyowoni

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 245 mm, total length: 211 mm, total width: 212 mm, spindle speed (max.): 5,000 rpm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 720 mm, grinding wheel diameter: 250 mm, overall weight: 5,000 kg, Machine has only run with oil cooling, machine is equipped with dressing roller, measuring probe, pneumatic workpiece clamping, -- New linear guides and control conversion in 2014 Hnjdpfx Agoug H R Sowji

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Hsdpfx Agjyn Nktoweni

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Hodpfx Ageyn Nkmjweni

Condition: good (used), Year of construction: 1999, Offered is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control. The machine is already dismantled and ready for loading. Manufacturer: CHIRON - Works 78532 Tuttlingen Type: FZ 22 S high speed Machine no.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2355 h year of construction: 1999 Weight: 6500 kg Inspection report measurement from 2021 available x-way: 750 mm y-way: 520 mm Hnodpokr E Nnjfx Agwji z-travel: 630 mm spindle holder: SK 40 CNC control: Siemens SINUMERIK 840D table size: 1150 x 570 mm max. table load: 1200 kg tool changing device: 20 pos. Coolant device operating voltage: 400 V total power requirement: 32 kVA space requirement W x L x H: approx. 2.00 x 3.80 x 3.0 m The price is net, plus VAT, ex works free loading.

Condition: used, Year of construction: 2016, Technical details: Hnsdpfxowbgcnj Agwoi turning diameter: 26 mm Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2016 Machine was only used for reworking, i.e. only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading belt Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. transmit function Adjusting microscope 16x magnification Coolant supply through the spindle clamping cylinder, Sealing air, Speed increase of the motor spindle to 8. 0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Knoll Compact coolant device Knoll MBE interface Small fire extinguishing system Kraft & Bauer Network interface for teleservice A total of 2 similar machines are available - package sale possible Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes *

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm Hodpfowp D Nbex Agweni b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), cylindrical grinding machine Hnsdpfstrgndox Agwsi

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Hodpfxeu Dm Izs Agwjni

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, Hodpfx Agst Hw Naeweni workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.