C

Bosch 3,5 MW

Year of construction: 1992, condition: excellent (used), Gas burner Weishaupt WM-G50/2A version ZM Power 600-5200KW: Year:1992 including gas line from Dungs DN50. Blodpfehl In Rjx Ak Heg Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! Bledpfx Ajx Aktwok Hog - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Bodpfow Ug Agex Ak Holg

Condition: good (used), Esterer board sorting plant / sorting plant / length sorting plant right hand discharge 5 sorting boxes Total length 26 meters Bedpfx Ajgw Scqjk Helg 1st box 2 meters 2nd box 3 meters 3rd box 4 meters 4th box 5 meters 5th box >5 meters good condition - available immediately Location: Germany, near Landau an der Isar Please visit also my other advertisements. I am looking forward to your inquiry.

Year of construction: 2020, condition: new, Transport systems Bledpfx Akofz U S Ej Hsg Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Blodpfsv Dvllsx Ak Hjg Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Blodpfx Akjt S Sxgj Hjg Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Bledpswp E E Defx Ak Hsg Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), Year of construction: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of production: 2019 Axes: 6 Blsdot Rwwrjpfx Ak Hog Reach: 1441 mm Load: 12 kg Fanuc System R-30iB Plus robot controller and 2 m x 2 m x 2.7 m housing (without Kemper extraction system)

Condition: used, functionality: fully functional, tank capacity: 30,000 l, total height: 7,200 mm, inner diameter: 2,500 mm, outer diameter: 2,900 mm, overall weight: 6,000 kg, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, pressure (max.): 3 bar, Buffer Storage Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Overall height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Characteristics Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: smooth aluminium sheet (weatherproof) Mineral wool will be newly installed, i.e., insulation thickness can be chosen freely. Equipment Mounting: Feet Number: 4 Attachment: fixed Blsdpfxjxdknko Ak Hog Top/base type: dished end (Klöpper head) Bottom/base type: dished end (Klöpper head) Connections: - 1 manhole DN 600 with blind cover - 7x 1/2'' sockets for temperature sensors - 2 lifting lugs on the shell - 2 lifting lugs on the top head - 2 lifting lugs at the tank feet - 1 drain 2'' at the tank bottom, routed to the outside and terminating in a 2'' ball valve - 1 vent Ø33.7 x 3.6 mm, routed downwards laterally within the insulation and ending in the manhole cover enclosure - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center Documentation: Drawing