Roller sets for profile bending machine, 3-roller ring bending machine, standard roller set, profile

HERKULES passend für BO 238 K

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane Csdpfxowrxczo Aizeri SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: excellent (used), Year of construction: 1986, Dimensions L x W x H: approx. 450 x 300 x 1700 mm Maximum drilling depth: 60 mm Maximum workpiece height: 350 mm Table dimensions: 250 x 250 mm Speed: 430 - 9000 rpm (12 speed levels) 2 motor stages Csdpfxsh Dimyj Aizjri Speed adjustment via V-belt Includes drill chuck Includes 16 A connection plug Includes base frame

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Crodpfxshmvawj Aizoi Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Crjdpfx Aijd Id Ugezoi Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg Cjdpfx Aera Rrhsizeri a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Csdpfx Aisuz If Nezsri Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2023, condition: new, Boiler capacity: 270 l Codpfx Aehmi Nqsizori Flow rate: 680 l/min Motor power: 5.5 kW

Condition: new, Bernardo HBS 460 N bandsaw - 400 V Technical specifications Cutting width 465 mm Cutting height 280 mm Saw band dimensions 3607 x 25 x 0.6 - 3 TPI Saw band widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimensions 480 x 630 mm Table height 970 mm Saw table tilt -5° to 45° Dust extraction port Ø 2 x 100 mm Motor output power S1 100% 2.2 kW (3.0 HP) Motor input power S6 40% 3.0 kW (4.0 HP) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Scope of delivery • Saw band • Rip fence with magnifying glass • Miter fence • Drive wheels made of aluminum • Ball-bearing saw band guide • Motor incl. brake • Push stick • Operating tools Crjdsd N S Urepfx Aizei

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Cjdpewwlkiefx Aizori

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types Crodjxaaf Repfx Aizei - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame