Twin screw extruder / laboratory extruder

Brabender 2 x 30 mm

Year of construction: 2013, operating hours: 960 h, condition: used, machine/vehicle number: Technical name AVN2000AB-2525PR-078250, Please check the below attached pdf. document for the full detailed description of the machine. For additional fotos and information please don't hesitate to contact us. Purchase 1 AVN2000AB Tunnelling Machine Mixed Ground Cutting Wheel The mixed ground cutting wheel is designed for AVN2000AB in mixed ground such as: mixture of soft ground, gravel or coarse gravel, weathered/soft rock. Supplied with soft ground cutting tools & disc cutters. Full set of cutting tools bolts and cutting wheel bolts included. Maximum Unconfined Compressive Strength (UCS ) 60 MPa Closed face type Cutting diameter 2 575 mm Cutting tools Chisel 12 No Chisel width 100 mm Scraper 8 No Cutting disc 11 No Cutting disc diameter 305 mm Tooling system backloading Machine AVN2000AB Articulated shield with face support / excavated material transportation by slurry. Slurry feed by 6 nozzles into crusher / excavation chamber and 2 nozzles to area around slurry discharge pipe. All nozzles (crusher/excavation) are equipped with interchangeable nozzles inserts for different nozzle diameters to run in medium pressure mode. Integral conical stone crusher behind cutting wheel. Face access for cutter inspection / change. Ihedpfx Aslkdl Ajdwet Optional easily fitted cutting wheels for soft ground, mixed soil conditions with some rock and full rock conditions. Central drive unit with splinted shaft for reliable, heavy duty torque transmission to cutting wheel.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. Iedpfx Aod E A I Iedweht If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Ihjdpfxouxa Abo Adwot Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE Ihsdpfxsua D Als Adwet purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel mechanical safety door Iedpekuz T Uefx Adweht data collection

Condition: excellent (used), Year of construction: 2004, loading capacity: max. 1.500 Kg. wire diameter range: 2,0 - 8,0 mm table diameter: 1.100 mm Iedpfx Adoipv R Tjwoht

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan Isdpfjghgq Njx Adwsht

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm Ihodpfx Asf Ncadsdwst 2x machine cutting torch with cutting table

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Iedpfsu Itqdex Adweht

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: Iedpfx Asnh R Ekedwjht - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site