Vertical machining center

BRIDGEPORT VMC 1000

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Iisdpfx Ajz Dkilsiyog

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Iiodpfx Aijyybpmeyjg Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. Documentation available. An on-site inspection is possible. Individual sale possible. Isdpfxoy E S D Sj Aiyeig

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Number of tool slots: 30 Iodpfx Aiezkh I Usyeig • Chip conveyor: Complete with Chip Conveyor

Condition: good (used), Year of construction: 2001, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain TNC 426, total height: 2,750 mm, total length: 4,050 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, overall weight: 4,200 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 665 mm, spindle motor power: 13,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Travel X/Y/Z 800/510/600 mm, Control HEIDENHAIN TNC 426, spindle power 13 KW, spindle speed 5-12'000 rpm, ISO40, table size 490x1000 mm, max. table load 750 kg, tool changer 30 places, dimension 40500x2250x2750 mm, weight ca. 4200 kgs, accessoires Renishaw OMP60 tool prove, coolant through spindle 20 bar, chip conveyor, tool holders, manuals Ijdszblfgepfx Aiyoig

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. Ijdpfx Aezf Iqrjiyeig • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Isdpoy D N Aisfx Aiyeig Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: repair required (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Condition: currently not fully operational - Motor spindle does not start. Suspected cause: controller board - Potentiometer defective - Gib strips need adjustment - Maintenance unit missing Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Machine no.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Design: vertical Iisdpjyyvnwjfx Aiysg Control: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A Video available on request; the spindle still turns smoothly!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Iedpfezfqacex Aiysig Additional equipment • Chip conveyor Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Isdpfx Ajzbqx Ssiyoig Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring • Spindle cooling; air blast through spindle Isdpfjycuc Dox Aiyjig • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment, not included • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Taper Size ISO 40