5 axis CNC universal machining center

CHIRON FZ 15 KS

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Coolant unit X-axis travel / X-axis stroke: 550 mm Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm Cedezyyqyspfx Aizori If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Crjdpfx Aezk I R Aeizei Technical data shown on pictures.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors Crsdpfxoxw Uplo Aizsi # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to Crjdpfx Aiewwaruszji 186 rpm)

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Codpfx Asu Rc Hmsizori

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Sprint 555 Year of manufacture: 2007 Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach Cjdpsvt N Dyjfx Aizsri

Condition: good (used), Year of construction: 2015, Parts shown by hand not come. Codpfjzzqnxjx Aizori Upper turret have problems. Dont work.

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW Cedpfjznnc Hsx Aizjri weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: used, Year of construction: 1980, Technical details: x-travel: 820 mm y-travel: 300 mm z-travel: 485 mm spindle taper ISO: SK 40 spindle head swivable left - right: 0 - 45° rechts/links ° quill travel: 80 mm range of revolution per miute: 56 - 355 und 450 - 2800 U/min feed:: X/Y: 10 - 80 und 80 - 630 mm/min rapid traverse : X/Y: 3150mm mm/min Table dimensions: 1700 x 400 mm table surface area: 1120 x 205 mm total power requirement: 7,5 kW kW machine weight approx.: 2120 kg dimension machine approx.LxWxH: 1,7 x 1,7 x 2.5 m additional features: -Table adjustment via machine see X/Y and Z data Codpfowtct Tex Aizjri -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates *

Condition: like new (used), Year of construction: 2016, operating hours: 4,000 h, functionality: fully functional, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,000 h, number of slots in tool magazine: 38, Note the low operating hours. This machine is in very good condition and comes with many accessories. Cedps Afzgwofx Aizeri