Vertical machining center

CHIRON FZ

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm Kdjdpfx Aaeu Idnmsbou milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Model 840D solution line Main Drive Spindle speed range 15000 rpm Spindle motor power 7 kW Number of axis 5 Movement X-Axis Movement 450 mm Y-Axis Movement 270 mm Z-Axis Movement 310 mm Clamping Unit Clamping force 4 kN Media Chip conveyor Yes Additional Equipment Chip conveyor Oil mist extraction Signal lamp Paper band filter Spindle oil cooler Kedpfxjxpyttj Aabjdu This 5-axis CHIRON FZ08 MT turn-mill centre was manufactured in 2011. Consider the opportunity to buy this CHIRON FZ08 MT turn-mill centre. Contact us for more information. Application Types Turning

Year of construction: 1985, condition: used, Drilling capacity in ST 60 20mm Tapping capacity M16 Milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5.7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Step change 1.12 Spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y- axis 15 m / min feed force of the X- and Y- axis 6000 N Kodpfob Hf I Tsx Aabodu Programmable feed rate in all three axes 1 to 4000 mm/min Projection spindle to guide 300 mm Distance spindle support to table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter at full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Cut to cut time approx. 3.2 sec. Total connected load approx. 15 kW (but only needs approx. 5~10 kW in operation) Machine weight approx. 3,5 to. Requires commercial compressed air connection

Year of construction: 2010, condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Kdodpfoiy D Tmsx Aabju Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: used, Year of construction: 2002, operating hours: 69,840 h, functionality: fully functional, machine/vehicle number: 204-77, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, nominal power (apparent): 10 kVA, torque: 23 Nm, controller manufacturer: FANUC, controller model: 21i-M, table width: 300 mm, table length: 550 mm, table load: 100 kg, overall weight: 2,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 420 mm, number of spindles: 1, number of slots in tool magazine: 12, mount diameter: 32 mm, tool length: 160 mm, tool diameter: 63 mm, tool weight: 700 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, CHIRON Vertical CNC machining center FZ 08 W YEAR 2002 Ready for use, partly overhauled, installation and IBM can be offered. Drilling capacity D 16mm Thread cutting M12 Milling capacity 30cm/min CNC type: Fanuc 21iM Kjdpfjurb Azsx Aabodu 2 pallets 0/180 Spindle revolutions: 10500 12 HSK32 tools Coolant system with chip container Tank capacity 100 liters Pump capacity 60 liters/min at 1 bar Automatic loading door

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 346-09, This machine is equipped with a 2m LNS bar feeder, allowing it to fully automate the production of milled and turned parts directly from the bar stock. On the main spindle, there is an E162 power chuck with a bar capacity of Ø10mm. The bar feeder itself is designed for material up to Ø65mm. Additionally, the machine is fitted with a pneumatically operated two-jaw chuck to allow complete secondary machining of components on the back side. Finished parts can then be removed by an integrated gripper and placed onto the conveyor belt. The machine was retrofitted by CHIRON specifically for precious metal machining. This mainly means that seals within the machine have been reinforced, and the standard chip conveyor was replaced by a drawer unit with a fabric filter. Kjdew U Tbcspfx Aabodu Other features: - High-speed spindle with HSK 40 interface and high-pressure coolant (max. 40,000 rpm and up to 80 bar) - Oil cooler and chip filtration system - Kraft und Bauer fire suppression system with optical sensor - Oil extraction system - Renishaw probe - Integrated tool breakage control/measurement - Tool changer with 64 positions Location: Medical device manufacturer >>>> Collets and tool holders are included in the sale and are part of the listed price.

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Main Drive Kdjdoxnd Npjpfx Aabou Number of axis 3 This 3-axis CHIRON FZ 18 L was manufactured in 2004. A robust vertical machining center with a weight of 7000 kg, it operates on a 400 V working voltage and a power capacity of 30 kVA. Ideal for those seeking reliable and efficient machining capabilities. Contact us for more information about this machine. Application Types Milling

Year of construction: 1985, condition: used, Technical manuals and tool holders available; further technical data: Kjdpfx Ajbwn Rheabsdu Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Kedexnd Nispfx Aabedu Main Drive Number of axis 3 This 3-axis CHIRON FZ28 KL was manufactured in 2004. A vertical machining centre with a weight of 7000 kg, it operates on a 400 V working voltage and a control voltage of 230 V. Power capacity is 30 kVA with a rated current of 44 A. Consider the opportunity to buy this CHIRON FZ28 KL vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Spindle speed range 10000 rpm Spindle motor power 95 kW Number of axis 2 Kodpfjxlvccex Aabjdu Movement X-Axis Movement 550 mm Y-Axis Movement 300 mm This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Application Types Milling