Citizen Cincom L32

Citizen L32VII

Condition: repair required (used), Year of construction: 2006, CNC Swiss-type automatic lathe Brand: CITIZEN Model: L32 VII Year: 2006 with Mitsubishi Meldas control Synchronous spindle Driven tools Isdpforh Efwsx Afaetc Backworking Fire extinguishing system Chip conveyor Bar loader IEMCA BOSS 332 E/R (Machine has a fault – tools cannot be selected, e.g. T01, T06, etc.)

Condition: used, Year of construction: 2011, functionality: limited functionality, bar passage: 51 mm, overall weight: 6,000 kg, bar capacity 51 mm – three turrets – three Y axes – fixed/driven tool holders – LNS Sprint 552 bar feeder new in 2011 – Fanuc Control Iedpfxjwvvyrj Afaotc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm Itodpjx Uzcvefx Afajc turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: MGL203279932, turning diameter: 32 mm, Equipment: bar feeder, documentation/manual, The machine has only been operated in single-shift use! TECHNICAL DETAILS Max. machining diameter: 32 mm Spindles Main spindle: with collet chuck Sub spindle: with collet chuck and air blast device MACHINE DETAILS Operating hours: estimated approx. 25,000 - 30,000 h Itsdjxrcpvepfx Afajc EQUIPMENT Bar feeder FMB Turbo 5-42/3200C Documentation High-pressure coolant pump Workpiece removal unit Various collets Central lubrication system Ejector for workpieces with through-hole

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. 230-600 ppm. Also available with Washer. Itjdpfx Afeh Riuusajc Completely overhauled to new. Machine visible in Calolziocorte (LC). OVERHAUL TO CE STANDARD. Overhaul includes: - DISASSEMBLY AND CLEANING OF EACH OF ITS PARTS - REPLACEMENT OF ALL BEARINGS - GRINDING GUIDES OR EVENTUAL REPLACEMENT IF NOT IDONEE - OVERHAUL OF INTRODUCER GROUP - OVERHAUL OF SLIDE ASSEMBLY WITH REPLACEMENT OF LARDONS IN BRONZE - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULIC UNIT COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DIVIDERS - NEW WATER PUMP FOR COMB - NEW Ø670 CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR CONTROL AND PHOTOCELL FOR OVERFLOW - REVISED ROLLER EVACUATION UNIT - PROTECTIVE CASING COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS COMPLETE WITH INVERTER - NEW MOTOR - BELTS REPLACEMENT - PAINTING RAL FROM YOU INDICATED

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Itjdpfx Afjxxlkpsaec Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: excellent (used), Year of construction: 2003, General Information Type: CNC Swiss-Type Automatic Lathe Commissioned: 12/2005 Itodpoxgh Erefx Afaoc Condition: Good, no maintenance backlog, operated in a single shift. Documentation: Complete machine documentation is included. Capacities Maximum Machining Diameter: 32 mm Automation and Spindles Bar Loader: FMB Turbo 5-42/3200C Main Spindle: With collet holder. Sub-spindle: With collet holder and blow-out device. Additional Included Equipment - High-pressure coolant pump - Workpiece removal unit - Various collets - Central lubrication system - Ejector for workpieces with a through-hole Exclusions - The machine is sold without tools and without a suction unit.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.5 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 5 - Live tools speed : 5000 [rpm] END ATTACHMENT Ijdsuhazgspfx Afaotc - Number of positions : 4 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.110 x 1.085 [mm] - Machine height : 1.832 [mm] - Machine weight : 2.200 [kg] MACHINE HOURS - Number of working hours : 32.264 [h] EQUIPMENT - CNC : Meldas - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump - Bar loader : FMB MINIMAG 20

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 2710 mm Measurements depth 3900 mm Measurements height 2470 mm Machine weight 10000 kg Main Drive Spindle speed range 5000 Spindle motor power 14/17 kW Number of axis 5 Additional Equipment Dynamic two-pressure clamping for the main and counter spindle Tailstock function for the counter spindle with foot switch Isdpfx Afsx D R U Roajtc This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. It's equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information. Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 200 - 10000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 200 - 12000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 3 END ATTACHMENT - Number of positions : 8 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] POWER SUPPLY - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1655 x 1125 [mm] - Machine height : 1700 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 13.837 [h] Itsdpouhbbzefx Afajc EQUIPMENT - CNC : Fanuc Oi-TD - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump : 70 [bars] - Bar loader : IEMCA ELITE 220 E / 32 LL - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer