CNC lathe

CMZ TTL66

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub-spindle, tailstock function, tool measuring arm, programmable finished parts gripper, chip conveyor, Irco short bar loader magazine, Hainbuch chuck on both spindles, accessories: tool holders, driven tool holders, immediately available. Iiedpfxjy Df E To An Doa

Condition: excellent (used), Year of construction: 2012, CNC Control: Heidenhain TNC 620 Axes X-axis travel (mm): 500 Y-axis travel (mm): 450 Z-axis travel (mm): 400 Iijdpfjyzar Nsx An Dja C-axis indexing (degrees): 360° (0.001°) B-axis indexing (degrees): -5° to +110° (0.001°) Feed rates (m/min): 12 Rapid traverse (m/min): 12 Work Table Pallet dimensions (mm): ø630×500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 10,000 Spindle drive power (kW): 9/13 (100% DC/40% DC) Tool System Tool holder: SK-40 Number of tools in magazine: 16 Max. tool diameter (mm): With free adjacent pockets (mm): ø130 With adjacent pockets occupied (mm): ø80 Max. tool length (mm): 300 Max. tool weight (kg): 20 Signal beacon CE conformity Coolant gun Direct XYZ measuring system Probe Handwheel Tool measurement Machine operating hours: Power-on hours: 28,826 Spindle working hours: 14,423 Geometry and spindle in very good condition

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: FANUC, number of axes: 3, This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Isdpfx Aex D Ei Asn Djia Machine Benefits Technical Machine Benefits • Lps for left spindle / axial stop for left spindle / coolant supply through left spindle / collet chuck hainbuch axfix 65 for left spindle / lps system in right spindle / coolant supply through right spindle / tailstock on the right spindle (long version) for rotating tailstock center cm 3 / collet chuck hainbuch axfix 65 for right spindle • Upper tool turret (t1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar) / lower tool turret (t2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar) • Tool presetter / tool life management / tool load monitoring / double radial holder for tools 20x20 / holder for boring tools Ø32 h75 / ttl/10400/02 axial holder for agw er32 with internal coolant supply 70 bar / ttl/10400/09 radial holder for agw with internal coolant supply 70 bar er16 • Coolant nozzles above the spindles / coolant wash nozzle / coolant tank level monitoring • Rotating viewing window / machine status light / rear chip conveyor with double chain / preparation for extraction system, connection flange Ø150 / special gantry enclosure / gl20-ii 3-axis cnc gantry loader / servo-controlled 2x180° double swivel gripper for shaft parts / workpiece carrier ws-700-3000 on the left front side / ws-700 with 3 rows of v-guides • Set of grippers for raw material: Ø32 mm, Ø35 mm, square 30 mm / set of grippers for finished parts: Ø32 mm, Ø38-40 mm, square 30 mm • Extraction system: lta e120-x1-h, includes mounting parts, hoses, and support • Cmz requires a signal indicating that a part can be placed / output signal indicating that the conveyor can move freely

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC lathe, brand CMZ, model: TTL-66-66-T1Y-T2Y Optional equipment: 9. Machine language: French 4. Machine manuals in downloadable PDF format available on cloud.cmz.com G-code Type A on Fanuc CNC Through-spindle coolant on left spindle Hainbuch collet chuck AXZUG 65 (standard) 2702/0008 for left spindle Iedpoyt Smhofx An Deia SMW-Autoblok BBD 175 Ø56 3-jaw chuck with a set of soft jaws for the right spindle Measuring arm Hinged belt chip conveyor, side discharge Upper turret (T1): Dual high-pressure pump (6+15 bar, 55 l/min) Internal turret (12): Dual high-pressure pump (6+15 bar, 55 l/min) Machine stop indicator lamp Automatic parts catcher Parts catcher with bucket and pneumatic open/close for collecting ejected parts Pneumatic parts ejector for sub-spindle with 100 mm stroke, adjustable stroke and end-of-travel sensor Unimag interface for bar feeder

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Iedpfxeu Dm Izo An Dsia

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: Iisdpfxexmhdnj An Dea - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Iedoifi D Tspfx An Deia Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox Iodpjw Niuhefx An Deia - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper Iiodpfxsxuppuj An Doa • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Ijdpehrihyofx An Dsia