Chilled water chiller

DALEX DRS 8

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Lrsdpsxgdlnefx Akfek Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor Ledpfx Akjguztgefjrk -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Lrsdpfsx Ap Hpox Akfsk Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Ledpotqcqasfx Akfork Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Lrsdpfx Akem Ncayofsk Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, Refrigerant compressors system Bitzer -Type: 4EC-4.2Y-40S (x3), 4EC-6.2Y-40S (x3) -Volume: 22.7 m3/h (x6) -Cooling capacity for R404A: 90.5 kW at -5°C/40°C, 73.8 kW at -10°C/40°C, 42.4 kW at -25°C/40°C -Dimensions: 1900 x 800 x 1800 mm -Items in magazine: 1 Lrsdpfx Aew Raz Iekfsk -Reference number: Z116 -Condition: Used in very good condition, ready to work

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Ledpfsuma Thex Akfsrk Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm Lrodpoh Nq E Sefx Akfsk 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: good (used), functionality: fully functional, RIVACOLD UNIT + EVAPORATOR RIVACOLD Freezer Kit: - REFRIGERATING UNIT TYPE RV4B0905 COPELAND SCROLL ZF18KVE REFRIGERATING COMPRESSOR - RIVACOLD REFRIGERATING EVAPORATOR RX50334 The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Lrjdpfxsxrr Ris Akfsk Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Lsdpfx Ajubbw Aokfjrk Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced