Vertical machining center

Deckel Maho 64-V Linear

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V Lhsdpfsyz Tkfjx Abyjh • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm² Lodpow E I Itsfx Abyshh

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) Lhedpoy S Azhsfx Abyjh • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2003, x-travel 640 mm y-travel 600 mm Lhsdpowp S Rmjfx Abyeh z-travel 500 mm Control SIEMENS 810D powerline table dimensions 850 x 630 mm table load capacity 600 KG tool magacine with 30 Plätzen spindle turning speed range 12.000 U/min total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm Ljdpfx Abjucgyloyohh taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Lsdpex D E Hhefx Abyohh Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Lodpox D Ntfefx Abyjhh Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,430 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 2,900 mm, total length: 4,855 mm, total width: 2,945 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 1400 machining center – available for immediate delivery The LAGUN L 1400 machining center stands for high precision, robust design and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics and durable machine concepts. The machining centers impress with their reliability, easy maintenance and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Ljdpfx Ajhy Atfjbyohh Accuracy: Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer for you.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Lhedpfx Abox Stl Dsyoh Machine weight 6800 Main Drive Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Lhodpfx Ajx D Ikpebyeh Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling