Vertical machining center

DECKEL MAHO DMF 220 LINEAR

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Iedpfey Diabsx Aqpjtg

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 Ijdoyyybhepfx Aqpstg X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, Deckel Maho 3 axis vertical machining center in good condition with 15781 spindle hours. Well maintained by DMG services in the Netherlands. Immediately available for delivery. Ijdpfoy H Hz Ijx Aqpstg Viewing possible upon appointment. More info available on request. Cnc control Siemens Sinumerik 840D Number of axes 3 Maximum Reach X 2200 mm Maximum Reach Y 560 mm Maximum Reach Z 720 mm Maximum Clamping Height 600 mm Table Size (LxW) 2600x600 mm Maximum Table Load 2200 kg Guide Type Linear Max. Speed 18,000 rpm Max. Power 35 kW Tool Holder SK40 Tool Magazine Capacity 60 Tool Change Duration 9.6 sec Including: ELECTRONIC HANDWHEEL 18.000 RPM HEIDENHAIN MEASURING PROBE MODE 4 DIVIDING WALL CHIP CONVEYOR SCRAPER BELT TYPE IKZ WITH PAPER BELT FILTER BLOWN AIR THROUGH SPINDLE EXTERNAL COOLING OIL MIST SEPARATOR BREAK REMOVAL TOOL WITH LASER RESIN GUN NET SERVICE EXTENSION IBN NET SERVICE Optional: Large set of SK40 tooling and vises/clamping systems available. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 44,199 h, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details. • Connection values: 400V/50Hz Itedpfxjyw Rapo Aqpjg • Swing door machining possible Additional equipment • Chip conveyor BLECHTECHNIK DMF 220 (2003) • Coolant filter unit DMG

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 Iedpfeu Hl R Tjx Aqpstg quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology Itsdpsyuzg Hofx Aqpsg 5-axis simultaneous machining available

Condition: excellent (used), Year of construction: 2020, Data: XYZ: 2160 x 760 x 650 mm Control: Fanuc Iodpfx Ajyuiqteqpetg Magazine: 30 tools Spindle: 12,000 rpm -- SK 40 Table: 2160 x 760 mm Tool measurement Renishaw probe Through spindle coolant (IKZ) Chip conveyor Weight: 15,000 kg Machine powered and ready for demonstration

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) Itedpex D Irmjfx Aqpog • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm Ijdpeyzzf Rofx Aqpjtg AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Tool turret Number of driven tools 12 (12)

Condition: good (used), Year of construction: 2009, Machine will come with robot . Iodpfx Aqoxfu S Njpetg 42.000 rpm