Vertical machining center

Deckel Maho DMF 220

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. Gedpjtqmr Rofx Aabekc max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: used, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D contouring control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0–20,000 mm/min Rapid traverse X-axis 100 m/min Rapid traverse Y+Z-axis 50 m/min Power supply 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Internal coolant supply through the spindle, 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle center via M-function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at the handheld command station - Separate coolant treatment system, paper band filter with filtration sump - Chip conveyor for positioning under the work area - Centralised grease lubrication - Operating manual - Operating hours – control on = 75,188 h Gkodjw Iqt Aopfx Aaboc - Operating hours – program run or spindle on = 31,632 h - Controller with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg) Main machine transport dimensions L x W x H 500 x 248 x 275 cm Additional transport space required for further parts 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Good condition

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Gjdpfxowd N D To Aabekc Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min Gedpfjtumqvjx Aabskc rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)