Vertical machining center

DECKEL MAHO DMF 250 Linear

Condition: good (used), Year of construction: 2006, functionality: fully functional, x-travel 2500 mm y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 Credpfx Abjzclwlexof spindle turning speed range20 - 18000 rpm rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca.25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m Operating hours: 113475 Spindle hours: 58183 (June 2026) * 4-axes controlled * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Measuring probe (workpiece) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja Cjdpew S Efzofx Abxorf total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Crjdpfozdkhkex Abxsf Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm Csdpfx Aoy Skmrobxsrf • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg Codpfxjwgi Dre Abxorf

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Crodpfxezaq Ecs Abxsf Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Csdpfsx Nr Tuox Abxerf Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: used, Year of construction: 2009, operating hours: 28,600 h, functionality: fully functional, machine/vehicle number: 10915566124, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Control: Siemens Sinumerik 840D Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center Crjdpozl Rxxofx Abxof * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle * Roller Linear Guideways * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Crjdpfx Abjvamqdjxjf

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, CNC control Heidenhain iTNC530 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Codpfx Aoy Hqmhebxjrf Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.