Machining Center - Vertical

DECKEL DMC 65 V

Condition: used, Year of construction: 2001, x-travel 650 mm y-travel 500 mm z-travel 500 mm control Siemens 840 D table surface area 800 x 500 mm rapid traverse 60 m/min table load 1,5 t turning speed range 0 - 18.000 U/min max. torque on the spindle 130 Nm power capacity - milling spindle 15 kW no. of tools in the magazine 30 Stück tool taper HSK 63 A | weight of the machine ca. 11 t dimensions 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - Lasersystem for tool measure Fjdpfxoxf I Nus Ah Djpr - 3,5" floppy disk - 4th axis - new spindle in 2016

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t Fsdpjwbvhasfx Ah Djpr dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Fpodpsv Irwrofx Ah Dor Table size: 800 x 400 mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Fpjdpfx Ajpfawheh Djr Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Viewing appointment possible. Best regards

Condition: like new (used), Year of construction: 2012, operating hours: 6,589 h, functionality: fully functional, We are selling a beautiful POSMILL E1100 machining center, built in 2012. The machine has few spindle hours (6,589) and was used for single-part production. The machine is ready for demonstration with power at the delivery point. Technical specifications: X-axis 1,100 mm Y-axis 600 mm Z-axis 510 mm Spindle/table distance 120-630 mm Table dimensions 1,300 x 600 mm ITNC 530 control system - ITNC 530 control system - 35.1 tool measurement system - Workpiece measurement system with probe - Linear measuring system in all axes - Internal coolant supply for internal machining - Various tools with holders - Chip conveyor - Filter system Fodpfx Ahewkhy Tj Dspr - Workshop trolley with holder - Vice

Condition: used, Year of construction: 2001, Technical data: Fodot Hr Ahjpfx Ah Depr Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: refurbished (used), Year of construction: 2004, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 600 mm, Mitutoyo CMM Crysta Apex C9206 Measuring ranges 900x2000x600mm Accuracy 1,7 + 3L/1000µm Slightly damaged V-Axis covers (will be replaced or delivered without) Software MCOSMOS-1 V3.5, Windows 10 PC or selectable upgrade to: - Mitutoyo MCOSMOS 4.2 incl Geopak & MCAT1000S or new license - EasyCMM I++ Server plus Inca Professional Probe Renishaw PH10T with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Scanning Probe Renishaw SP25 with PH10M - Probe Change Racks - New PH10M+ Head and Probe (upgrade) Fpodpfsf S Tmvex Ah Djr - MCOSMOS Offline license MCAT1000P - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration (plus additional travel expenses) Including 3 Month Warranty (excl. travel expenses)

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 35,600 m/min, rapid traverse Y-axis: 35,600 m/min, rapid traverse Z-axis: 35,600 m/min, workpiece diameter (max.): 127 mm, number of slots in tool magazine: 31, tool length: 330 mm, Haas VF-4SSHE – Vertical Machining Center The Haas VF-4SSHE is a high-performance vertical machining center, manufactured in 2007, equipped with Haas CNC control. Ideal for fast and precise machining, it offers generous work capacity and a compact structure. Main technical features: Axis travel: X = 1,270 mm, Y = 508 mm, Z = 635 mm Spindle: ISO-40, 12,000 rpm, 22.4 kW Spindle – table distance: 107 ÷ 742 mm Rapid traverse: 35,600 mm/min Feed rate during machining: 21,200 mm/min Table: Dimensions: 1,321 x 495 mm Load capacity: 800 kg Fjdowt Ripspfx Ah Depr Tool changer: Tool type: BT-40 Magazine capacity: 24 positions Max tool diameter (adjacent/free): Ø64 / Ø127 mm Max tool length: 330 mm Max tool weight: 5.4 kg Additional equipment: 4th axis – Haas rotary table Ø 310 mm High-pressure coolant pump through the spindle Tank with wash pump Spindle cooler Screw-type chip conveyor Manuals, electrical diagrams, and CE declaration Machine dimensions: L 4,100 mm × W 2,600 mm × H 2,690 mm – Weight: 6,250 kg

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee. Fsdpfx Ajtvfpcoh Dspr

Condition: used, TECHNICAL DETAILS - grinding diameter : 0.1 – 10 [mm] - total length : 10 [mm] Fpedsuhb N Sepfx Ah Djr - working stroke : 0-10 [mm] - working grinding wheel dimensions : 150 x 50 x 50 [mm] - driving grinding wheel dimensions : 100 x 50 x 40 [mm] - driving grinding wheel diameter : 100 [mm] - working grinding wheel speed : 4500 [Rpm] - driving grinding wheel speed : 20-50 [Rpm] - power : 6 [kW] - min. pressure : 5.6 [bar] - dimensions : 1300 x 1100 [mm] - weight : 700 [kg]