Crane sky Crane overhead crane Crane runway

Demag Kranbahn KBK2 500KG 10x7m Zub Demag KBK II KBK1 500Kg Stahl Kettenzug

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners Nsdpfx Abjhrkrtsbowp

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Nedpfx Abemqf Nbsbewp Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: used, Year of construction: 2000, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm bore capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm range of revolution per miute: 225 - 4.300 / 2x 8 step U/min spindle taper MT: MK 2 feed:: von Hand mm/U table surface area: 250 x 250 mm vertical adjustment: 325 mm table clamping surface LxW: 250 x 250 mm table rotating: 360 ° base plate surface area: 320 x 250 mm distance spindle center to floor plate:: 565 mm column diameter: 90 mm total power requirement: 0,55 kW machine weight ab.: 160 kg dimensions L x W x H: 0,9 x 0,6 x 1,1 m Njdpfx Absu R Uncobjwp High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 equipped with Röhm 3 -16 mm quick-action chuck Operation via control panel / foot switch *

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. Nsdpfoha E S Tjx Abbewp We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: excellent (used), Year of construction: 2007, Lot of 36 pillar cranes Nsdpfx Absl R Izbobewp Lifting capacity 500 kg to 2000 Kg Price 89.000 Euro

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm Njdpfsrz Tutex Abbewp - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Nwjdpfopiarnjx Abbjp Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: used, Steel construction for crane system Nwjdpfx Aebruzgsbbop Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no return possible.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044731, Offer 25160 Technical data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min Nwedpfow S D Emsx Abbep - Crane travel approx.: 20 m/min + 5 m/min - Operation via radio remote control - Crane total weight approx.: 1600 kg

Condition: like new (used), Year of construction: 2019, absolutely as good as new condition, 2 external wheels, 1 internal grinding spindle Siemens control controlled B-axis suitable for Capto grinding (out of round) center width 1000 mm center height 200 mm Nwsdpfx Absvt R Awobop