Bridge crane

DEMAG 3,2 to.

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium Kwodpfx Ajxk U Alobcew No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Kedpfxoxdncle Abcsww Control: Heidenhain Spindle speed: 10,000 rpm B-axis: automatic Number of tool changer stations: 60 Tool holder: SK-50 Number of pallets: 2 pcs Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Operating time: 59,112 h Spindle hours: 21,619 h Machine transport dimensions: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D contouring control - Central spindle air blast - Measuring probe - Rinse gun - Documentation - Chip conveyor (hinged belt) - Coolant system - Oil mist extraction

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes Kwsdpohyugljfx Abcsw - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm Kwodpfx Aenzpx Rjbcow -Weight: 477 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm Kwedpfx Aexu U Suobcew - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Ksdpfegculvox Abcjww Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Distance between centers: 1000 mm Kwsdpfx Ajtt Rawobcjw Height of centers: 175 mm Grinding length: 500 mm Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Ksdewgkq Tjpfx Abcoww Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg

Condition: used, Pallet with T-slots suitable for DMG DMC 100 H and DMG DMC 100 U. Several pallets still available. Kjdpsqx Uh Nsfx Abcjww

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned for a DH wire rope hoist Kedpfx Abjh Up U Dscjww NB! we have more than 15,000 Demag parts in stock see our website or other ads