Ropeguide P

Demag

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,646 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ Ppedpfxoyftamj Afhsl • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Condition: used, 5tSWF Krantechnik GmbH Podpfx Aodc A R Tsfhjpl

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ Psdpsyfq Alefx Afhopl • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg Psdpfx Ajyfhw Hjfhopl X=420mm Y=1200mm Z=1500mm

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation Psdpfxsmdqlle Afhjpl - separate control panel

Condition: good (used), Year of construction: 1975, Crane trolley DEMAG Type:PL 168 NF Year 1975 Ppodpeubbr Tjfx Afhel lifting capacity 3200 KG lifting height 4 m with operating bottle in good condition.

Condition: excellent (used), Year of construction: 1991, load capacity: 2,000 kg, Overhead Crane DEMAG - M + PK10-N-F MACH-ID 9360 Make: DEMAG Type: M + PK10-N-F Year: 1991 Motorized swiveliing 0 - 27-0 Gr Lifting capacity 2000 Kg Podpfxeyfd N Sj Afhjpl High speed 4000 mm/Min Low speed 10000 mm/Min Books / Inspection books included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet. Podefc I Haspfx Afhspl

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Podpfx Ajrgw Exjfhepl Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information Pjdpfx Aex D Nxzefhopl • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Podpfx Afjumhm Aehjpl Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Ppjdpfxox D Hyvs Afhol • Witmann included

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Pjdpeyctgbefx Afhspl Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: as good as new (ex-display), For sale Ppedpfsh Up Uyjx Afhel Hoist motor used/reconditioned for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Ppsdpfx Afsyctfqohsl Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request