Pillar jib crane, jib crane

Demag PK5N-F

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Lrsdpfxjgiud He Adwjg D - 44143 Dortmund - Wambel

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Lrjdpfxjiiy E Ts Adweg Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam Ledpfx Ajwki Apedworg - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Ledpfx Ajxmk Atedwerg Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----- Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)

Condition: new, Model Name Lrjdpfxegvqzce Adweg Airtower FT 20.000

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Ledpst R T Hcefx Adwsrg Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, ELMAG STBS-500 masonry band saw Lrjdpjt Egfzsfx Adweg STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner Ledpom Ak R Uofx Adworg PLC control, NC User-friendly visualization

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012 Ljdpfx Aomx Rrledwerg

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° Lodpfx Ajg Ip Efedwjrg blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable