Diesel engine

DEUTZ F 6 L 912

Condition: used, mileage: 8,91,000 km, power: 228 kW (309.99 HP), first registration: 01/2010, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, Year of construction: 2010, The turbocharger is defective! (TURBOCHARGER DAMAGE) Hsdst Tw Szjpfx Ah Usfn Not roadworthy! Otherwise, the engine and transmission are in good condition! Length of the box: 6.50 m Height of the box (inside): approx. 2.25 m

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: Hodpfxoup A Rzs Ah Uofn - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: used, mileage: 6,45,465 km, power: 332 kW (451.39 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 7,610 kg, maximum load weight: 10,390 kg, overall weight: 18,000 kg, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, Grr. Haus, 1x comfort seat, 2x recliner, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, electric roof, auxiliary heating, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, front exhaust, roof spoiler, side spoiler, differential lock, fog lights, leaf air suspension, aluminum tank, low noise G1 Wheelbase: 3800 mm ONLY FOR SPARE PARTS! ONLY FOR SPARE PARTS! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hfodpfjvhhtcox Ah Uen - .

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 Hodpfxet Srw Ae Ah Ujfn YEAR - 2005 POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Hfodpfx Ahsl Sl Izo Uen Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, Year of construction: 2022, fuel type: diesel, number of cylinders: 6, cubic capacity: 12,816 cm³, rotational speed (min.): 1,800 rpm, overall weight: 1,015 kg, type of cooling: water, Industrial type Date of manufacture: 12/2022 Hedpfoyymp Eex Ah Uofn Condition: new Type of engine: OM460LA Serial number: 458.991 Please contact for more information Worldwide delivery

Condition: like new (used), Portable truck weighing scale Portable mounted on a chassis, bolted and removable. Hfsdemfqkhopfx Ah Ujn Capacity 60 MT Length 14 M

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Hfjdpfx Aeyyniash Usn

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 28 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 140 rpm, bed width: 135 mm, overall weight: 160 kg, OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA – professional metalworking machinery For over 12 years, we have been supplying metalworking machines to customers throughout Poland and Europe. We focus on quality, precision, reliability and professional technical support. MTP TYTAN 750 PREMIUM UNIVERSAL LATHE – 0.75 kW / 230 V WITH STEADY RESTS The MTP TYTAN 750 PREMIUM is a robust and precise universal lathe designed for workshops, production facilities and training centres. It is suitable for external and internal turning, longitudinal and facing operations, drilling, taper turning, and cutting metric and imperial threads. FEED AND THREADING GEARBOX The machine is equipped with a mechanical feed and threading gearbox with two gear-selection levers, allowing the operator to quickly and accurately select the appropriate transmission ratio for the required operation. A clear feed, threading and gear-selection chart is located directly on the front of the machine, making it easy to select the correct lever positions and change-gear configuration. Combined with precise synchronisation of the lead screw with the main spindle, this system enables accurate and repeatable cutting of metric and imperial threads. The machine bed features double-prismatic guideways, providing high rigidity, stable carriage guidance and excellent machining accuracy. The PREMIUM version also features a tailstock with an eccentric quick-lock mechanism, allowing fast positioning and secure locking. Thanks to its 230 V power supply, no three-phase electrical connection is required. IN STOCK – IMMEDIATE DISPATCH AVAILABLE! PLEASE NOTE: MACHINE STAND / CABINET IS NOT INCLUDED. TECHNICAL DATA: • Turning length: 750 mm • Max. turning diameter: 265 mm • Bed width: 135 mm • Spindle bore: 28 mm • Spindle taper: MT4 • Tailstock taper: MT2 • 3-jaw chuck: 125 mm • Spindle speed: 140–2000 rpm • Metric threads: 0.2–3.5 mm • Imperial threads: 8–56 TPI • Motor power: 0.75 kW • Power supply: 230 V • Dimensions: 1510 × 570 × 580 mm • Weight: 160 kg STANDARD EQUIPMENT: Hsdpeyuc T Ijfx Ah Uofn • 125 mm 3-jaw chuck • 4-position tool post • Mechanical feed and threading gearbox • Change gear set • Fixed and travelling steady rests • Set of 5 turning tools, 10 × 10 mm • Self-locking drill chuck • Drill chuck arbor • Jaw set • 2 fixed centres • Chuck guard • Chip guard • Chuck key The robust steady rests provide additional support and stability when machining longer workpieces. SALES CONDITIONS: • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Technical documentation / operating manual • Delivery to the customer can be arranged Transport costs are calculated individually according to the delivery destination. We also invite you to explore the complete range of Metal Technics Polska machines.

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Mean Piston Speed: 10.15 m/s Hodeyzaayjpfx Ah Usfn Power Ratings for Construction Equipment Engines Group I: Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.