Used gas engines for sale (9)

Condition: used, Year of construction: 2002, operating hours: 69,000 h, functionality: limited functionality, power: 625 kW (849.76 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, input frequency: 50 Hz, load hours: 69,000 h, Motor z generatorjem je demontiran iz obstoječega kontejnerja. Prodaja se samo motor z generatorjem in pripadajoča krmila omara. Vsi servisi so bili redno izvedeni s strani Jenbacher serviserjev, saj smo imeli sklenjeno vzdrževalno pogodbo. Iaslhccow Dn Spoqnen Zadnji cečji servis je bil opravljen pri 50.000h, menjana je bila tudi turbina. Je v dobrem stanju, shranjen v skladišču.

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper Iolhccqsx Huxujnsan The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: used, Year of construction: 2017, operating hours: 1,800 h, functionality: limited functionality, number of cylinders: 12, nominal power: 275 kW (373.90 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: water, We offer this used MAN Gas E3262E302 gas engine, year of manufacture 2017. Year of manufacture: 2017 Type: E3262E302 Serial number: 81147448124783 Factory number: 5077783 Iaslhccqjx Saqgjnjn Rated power: 275 kW Speed: 1500 rpm Ambient temperature: 25 °C Installation height: 100 m If you have any questions or need further information, please send us a message or call us.

Condition: new, Year of construction: 2024, functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm - Engine length: 1,748mm - Engine height: 1,500mm - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS Iolhetpw Dfoccqnjan • Standard MAN factory approval with natural gas “H” • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor

Condition: new, Available in the following power configurations: 2x Liebherr G9512 --> 1060kW 4x Liebherr G9512 --> 2120kW 4x Scania DC13 ETA --> 1060kW 4x Scania DC16 ETA --> 1400kW agriKomp GmbH stands for over two decades of experience in the development and production of biogas CHP units and components for green gases. At the Merkendorf site, state-of-the-art systems are created, setting standards in efficiency, robustness, and reliability. Our production facility is ISO 9001-certified, a member of the German Biogas Association (Fachverband Biogas e.V.), and part of a Europe-wide network with established service partners who ensure smooth commissioning and long-term support. 1. System availability >97% delivers maximum operational security thanks to multiple GEN-SETS and rapid swap capability! Iolhccqsx Hqw Tsnjan 2. Maximum flexibility at highest efficiency from partial load to peak power: Whether at partial load and constant heat supply during extreme weather, or maximum load during power price peaks 3. Additional revenues in intraday trading: Intraday power price peaks can be leveraged with the direct marketer, without efficiency losses 4. Best-price guarantee: Procurement & full maintenance agreement 5. Automotive spare parts availability 6. Guaranteed start performance: >98% guaranteed success rate

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm Ijlhexcudaoccqnsan  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: new, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 29689491504001, Only 2 units left for sale! With ignition system, complete The system consists of a high-performance wood gas engine coupled with a generator for efficient power generation. The plant is designed for stationary operation and is ideally suited for industrial applications, combined heat and power (CHP) systems, or emergency power supply. Iaelhcjxxk Tpecqnsn MAN inline 6-cylinder engine with generator: - Robust construction for continuous operation - Optimized combustion for natural gas or biogas Directly coupled to the engine - High efficiency for maximum energy output - Designed for three-phase power generation Electronic ignition for precise control - High reliability even under demanding conditions Performance: as per type certificate Voltage: 400 V, 50 Hz Control: Integrated engine and generator control system High efficiency and long service life Maintenance-friendly design Adaptable for various types of gas Condition: The item was briefly installed but never put into operation. Therefore, it is new and fully functional.

Condition: new, operating hours: 1 h, functionality: fully functional, machine/vehicle number: s.n, 7B0106, arrangment 102-9407 352KW 1500 rpm NUOVO Iolhoxv Er Isccqnsan MAI USATO completo di attuatore

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2024, We offer a choice of natural gas or biogas engines from the manufacturer Liebherr. Type G9512 Standard scope of delivery -starter -Cylinder heads -Exhaust manifolds and elbows -Turbocharger Islhccqetpw Ecsnsan -Intercooler -Control valve (without actuator) -without gas mixer -without engine control and ignition system -without charge air line The engines are equipped with the following sensors: -single cylinder temperature monitoring -engine oil temperature sensor -engine oil pressure sensor -RPM sensor (2 pieces) -ignition signal transmitter -Mixture temperature sensor -mixture pressure sensor -Coolant temperature sensor -coolant pressure sensor