Work table, table, workbench

Dexion P90 Werkbank 1.400x1.000x938mm

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Fpedjzp Ituopfx Ap Den Maximum bar diameter: 66 mm X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Fedpfx Aoqx Sznep Djpn

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Fpedeibmn Eepfx Ap Don

Condition: used, first registration: 06/2016, Year of construction: 2016, operating hours: 9,837 h, HYUNDAI HL 730-9 A wheel loader with mulching bucket and clamshell bucket, automatic climate control • All-wheel drive Fjdpfswmpfpex Ap Djpn • Year of manufacture: 2016 • Operating hours: 9,835 • Approx. 27,000 km Attachments: • Mulching grapple bucket / clamshell bucket • Bucket capacity: 2 m³ • Power (kW / HP): 100 / 136 • Operating weight: 10,500 kg • GVW: 15,500 kg • Last safety inspection: 14/11/2022 Additional equipment: • Automatic climate control • Reversing camera • CD radio • Comfort seat • Automatic / torque converter transmission - German machine, always maintained / all servicing performed by authorized workshop!! - One owner! - Ready for operation! Errors and prior sale excepted!

Condition: good (used), Screws, hexagon head screws, socket head cap screws, Allen head screws -Hex bolts: M20, DIN 931 -Weight: 514 kg -Sizes/Quantity: M20 x 45 to M20 x 100, see photo parts list -Grade: 8.8 black or galvanized Manufacturer: various Price: complete Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces each = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces each = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces each = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces each = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces each = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces each = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces each = 125 pieces Fpedpsiqpyqofx Ap Dsn

Condition: good (used), Year of construction: 1995, machine/vehicle number: 117848, Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - Or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW Fpjdpfx Aozibdgop Don - Feed rate of the saw blade, hydraulically steplessly adjustable - Vertical hydraulic metal clamping device + 2 hydraulic horizontal metal clamping devices - Coolant system - Infeed – roller conveyor with storage area 5000 mm - Outfeed – roller conveyor with measuring stop and positioning control 4000 mm - Space required approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Fjdpfx Asyud Itsp Dopn Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,200 mm, total width: 1,200 mm, total height: 1,850 mm, overall weight: 2,950 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 40×2000 MTP-3212 The MTP 40×2000 Hydraulic CNC Servo Press Brake is a modern machine designed for precise sheet metal bending in manufacturing plants, workshops, and metalworking companies. Thanks to its CNC controller and high-quality components, it provides accuracy, repeatability, and operator comfort. MAIN ADVANTAGES • 40-ton pressing force • 2000 mm bending length • MTP-3212 CNC controller • Servo-driven X and Y axes • AMADA-type tooling system • Rexroth, Schneider and Omron components • High bending accuracy • CE certification MTP-3212 CNC CONTROLLER The modern CNC controller features a color touchscreen for fast and intuitive programming. The software automatically calculates bending parameters and allows storage of up to 40 punch types. EQUIPMENT • Upper punch • Lower die • 2 front support arms • X-axis – servo drive • Y-axis – servo drive • R-axis – manual adjustment • AMADA-type quick clamping system COMPONENTS The machine is equipped with Rexroth hydraulic valves, Schneider Electric electrical components, and Omron safety devices. Steel hydraulic connections increase system durability and reduce the risk of leaks. SAFETY • Safety light curtain • Side safety guards • Rear safety fence • Emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL DATA Pressing force: 40 T Bending length: 2000 mm Maximum sheet thickness: up to 3 mm Distance between side frames: 1600 mm Throat depth: 200 mm Stroke: 100 mm Open height: 300 mm Back gauge travel: 600 mm Motor power: 4 kW Weight: 2950 kg Dimensions: 2200 × 1200 × 1850 mm APPLICATIONS The machine is suitable for the production of metal enclosures, electrical cabinets, ventilation components, steel structures, bent profiles, and custom-made sheet metal parts. DELIVERY AND SUPPORT Fpsdpeyttfrofx Ap Don We organize machine transport throughout Europe. We provide technical support, assistance with machine and tooling selection, and access to spare parts and service. Contact us for more information and discover our complete range of metalworking machinery available on our website.

Condition: new, length 1560 mm width 760 mm height over floor 880 - 920 mm weight 70 Kg Workbench with drawer block Fjdpfx Apevblg To Dopn Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm.

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm Fpjdpfx Aou Tlhisp Den -Weight: 10.6 kg