CNC Lathe

DMG MORI CTX beta 500

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle nose: VDI 30, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar Bodpfx Aie Ahkfnsrodi - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Bdodpfxozlt Shs Airoi

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Bdodpfx Aijz D Ug Iersi Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Bjdpobql S Hjfx Airsdi Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Bdedpfxszwppyo Airsi Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders Bjdpsxur E Sofx Airedi

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Bodpfx Aszg Iqneirjdi

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Bedpszmh R Ujfx Airjdi Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Bjdpfoyq Hq Njx Airodi Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. Bdjdpfxjyc H Ewj Airsi With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.