CNC Lathe

DMG MORI NLX 2500 | 700

Condition: reconditioned (used), Year of construction: 2019, CNC Lathe DMG MORI NLX 2500 SY/700 Equipped with: DMG MORI M730 UM MAPPS CELOS control Year of manufacture: 2019 Turning diameter: 356 mm Travel in X-axis: 260 mm Travel in Z-axis: 795 mm Travel in Y-axis: ±50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Driven tools speed range: 10000 rpm Includes the following accessories: - Work area door with interior lighting - 12-position turret with 12 driven stations - C axis, Y axis - Touch probe (Marposs) - NC tailstock with foot switch - Manual tool presetting device (HS) - 3-jaw hydraulic chuck Kitagawa BB 254 with foot pedal (HS) - Various jaw sets for main spindle (HS) - 3 driven tools - Direct measuring system X, Y, Z axis - 4-color signal lamp - Chip conveyor Cedpfx Asw Suv Nsbcsrh - High-pressure coolant system with compact filter unit, 70 bar / 700 l tank - Operating manuals

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Crsdpfx Aovy Ig Hobcsh Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Crsdpfx Asxfmn Aebcjh Additional Equipment 15 bar pump with filter KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t Credpewgwnlsfx Abcsh The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter: 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Crsdpfx Abexamqmecjh Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: used, Year of construction: 2018, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm Crjdpfx Abjw Av T Ssceh travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 20 / 20 BMT40 : 5.5/5,5/3,7 kW speed of driven tools: 10000 1/min total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Robot interface High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: excellent (used), Year of construction: 2018, operating hours: 6,300 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 420 mm, spindle motor power: 18,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, Double-spindle lathe DMG MORI NLX 2500/700 with Y-axis and IRCO Simag loading magazine Year of construction: 2018 Control system: Celos with MAPPS M730UM Switch-on hours: 9,300h Program running hours: 6,300h Technical data: Main spindle speed: ISM 80, 10 - 4,000 min-1 Drive power: 18KW Chuck: Kitagawa 10" / 254mm Counter spindle speed: ISM 41, 100 - 4,500 min-1 Drive power: 11KW Chuck: Kitagawa 6" / 159mm Turret: 20 stations Speed AGW: 10 - 10.000min-1 Drive power: 5.5 KW Tool holder: BMT 40 Csdpst I E U Tofx Abcorh Travel distances: - X-axis: 250mm - Z-axis: 705mm - Y-axis: 100mm (+/- 50mm) - C-axis: 0.001° Counter spindle with tailstock function Accessories: - IRCO Breuning Simag 80.1.R.II loading magazine - Chip conveyor - Coolant system (incl. counter spindle flushing) - Manual tool measuring arm - Parts ejector main and counter spindle - Workpiece conveyor belt - Automatic door - Robot interface - Safety fence Interface - Signal lamp

Condition: used, Year of construction: 2014, turning diameter max. 356 mm turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Csdpfx Aowd Txnjbcjrh Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of spindles 1 Spindle speed range 4000 Codpfx Aexb E H Asbcsrh This DMG MORI NLX 2500 Y / 700 was manufactured in 2022. A robust horizontal turning machine, with Y axis and live tooling, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500 Y / 700 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 Crjdeu Hq Rlepfx Abcoh spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive