Multi-tasking lathe DMG Gildemeister -

DMG GMX 200 Linear

Condition: good (used), Year of construction: 2006, CNC Milling / Turningcenter Machine type: DMG GMX 200 linear Control: Siemens 840D Year: 2006 SPECIFICATIONS Max. swing over bed: 560 mm Turningdiameter: 400 mm Spindle speeds: 0 - 4.000 rpm Spindle power: 45 / 36 kW Torque: 750 Nm C-Axis CNC-Spindle tilting for cutting and turningopertations Max. revolution: 12.000 rpm Spindle power: 13,2/22 kW Travel X-Axis: 485 mm Y-Axis: 80 +/- mm Z-Axis: 1.070 mm Fgjdpfx Apoziy D Setog Rapid motion: (X/Y/Z): 40 / 24 / 70 m/min. Angular range: +/- 120° Tailstock: NC Quill: MK 5 Equipment Steady rest: SMW SLU-3.1 Chip conveyor paper band filter Cooling pumps: 8 bar; 20 l/min

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition Fgodpfxezr I R Ej Aptsg The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm Fgodpfezd Dw Eox Aptog C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Fgodpfxoug Uc Ns Apteg

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Fgedpsyucd Hjfx Aptjg Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: used, Swing Diameter Over Bed: 400 mm Fsdpfoxg Nd Aex Aptsgg Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Fjdpoh Nypfjfx Aptogg

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX Fedswzmpzjpfx Aptjgg table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Studer S32 with Siemens 840 powerline control and Felsomat handling. 30-degree angled cut. Top condition. Machine can be inspected under power. Fsdpfxewa Im Ee Aptjgg

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Fodpfx Apjx D I Rietegg Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Technical Machine Benefits • Max. Turning diameter: Ø 420 mm • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power