Vertical machining center

Doosan DNM 650

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,270 mm, controller manufacturer: FANUC, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details. Laodpj Aa Ax Rsfx Alyeh - Mains Connection: AC 220 V, 3-Phase, PE, 50/60 Hz- Rated Power: 42.55 kVA- Interrupting Capacity: 5 kA- Full Load Current: 124.30 A- Short Circuit Capacity: 35 kA- Circuit Diagram Version: DM50H00ZA03- Weight: 8500 kg- Control System: Fanuc Series- Additional Equipment: signal stack light, mist extraction ducting system

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m Ledevvtpxopfx Alyeah dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Lasdsx Dk Dljpfx Alysh Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: used, Year of construction: 2007, x-travel 900 mm Laedpfjw Rrb Hjx Alyjh y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm Ljdpjxrwpdofx Alysah b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Tool bore: KSK-A63 max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Lodpfx Asv Sdc Ujlysah

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO Lsdpfsu Nc Rijx Alyjah *

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm Laedpfxsf Hmn Aj Alysh travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: good (used), 3 machine vices Goody. Lsdpfjrai Akex Alysah

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 1,01,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table Lsdpfx Aezmfn Rolysah * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.