DOOSAN DNM 6700L

DOOSAN DNM 6700L

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. Fpedpfx Apezh U A Te Djn A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Fpjdpfxozcpplj Ap Den Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, Fpodpfxozg Efis Ap Dsn 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: Fpedpfx Apozv Ruus Djn • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 42, number of axes: 5, This 5-axis HERMLE C42 U universal machining centre was manufactured in 2011. It features a travel of 800 x 800 x 550 mm and a spindle speed of 18,000 rpm. The machine includes a NC swiveling rotary table and a tool magazine with 42 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C42 U machine we have for sale. Contact us for further details. Fpodpfjz Nf N Eox Ap Den - Table / Rotary System: NC swiveling rotary table PW 800 with torque drive in C-axis and helical tandem drive in A-axis- Pallet Changing System: Included- Pallets Included: 3x Palette 630/STM320 Sternnut- Automatic Cabinet Doors: Included- Hydraulic & Pneumatic Expansion: Included- High Pressure Coolant (IKZ): Internal coolant supply 80 bar- Chip Conveyor: Scraper belt conveyor / Standard chip conveyor- Filtration: Paper band filter- Coolant System: Vario pressure limiting valve, standard coolant unit, sealing air for scales, bed flushing- Air Blow Devices: Air blow device, air blast through spindle center- Chip Flushing Gun: Included- Mist Extraction: Oil mist extraction- Enclosure Top: Automatic mechanical cabinet roof- Safety Glass: Laminated safety glass window- Compensation: Electrical thermal compensation iTNC- Handheld Control: Electrical hand control module iTNC- Measuring Probes: Heidenhain measuring probe incl. preparation, BLUM tool breakage/measurement A2- Tele-Service: Remote maintenance- Supply Voltage: 400 V / 3~- Mains Frequency: 50 Hz- Control Voltage: 24 V-- Nominal Current: 60 A- Power Consumption / Load: 37 kVA Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Year of construction: 1998 Type of control: CNC Control: Mazatrol Fusion 640T Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Fsdpfx Aezw Txlep Dspn Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Fpodpfx Apox H Iyls Don Remote electronic handwheel Chip conveyor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system - HT400 (RC) control panel - Compressed air maintenance unit Fsdpozrtm Sofx Ap Dspn - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Fedpfxjzc D Age Ap Dspn Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Fjdpozw Rl Asfx Ap Dopn Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic