CNC lathe

DOOSAN Puma 240C

Condition: used, Year of construction: 2007, Technical details: Ncjdpox Aq Hwjfx Afljw turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Nsdpjy Hnt Eofx Aflocw Tool carrier I (X/Y/Z/B): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Ncjdpfxodkdi Te Aflew Pressure: 1,6 MPa

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Nodoxq E Dajpfx Aflscw

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm Nodpfx Afjcdi D Djlscw outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment. Ncsdey Dunwopfx Aflsw

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Nedpfx Aswgnz Ajflecw Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm Nodpfx Afsncfd Rslscw - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Tool holder: SK40 Weight: approx. 4,500kg Nedpfx Afoxxpcvslecw Operating hours: 9,521h Chip conveyor

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  - Capacity: up to 16,000 bph (based on 1.5L PET bottles) - Formats: 1.5L PET bottles (short neck and lid) - Bottle material: PET - Type of filler: Isobaric filler - Year of manufacture: between 1999 and 2007 (various machines) - Cap type: short neck - Type of label: OPP (Contiroll) Scope of Delivery  - 1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler - Air conveyors from blowing to labeler & filler - 1 x Labeler CONTIROLL | Krones | 2000 - 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector - 1 x Mixer for carbonated water and drinks | ca. 2000 - 1 x Inkjet printer HITACHI RXS - Conveyors between filler and tunnel - 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min - 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min - Transport of packages to palletizer - 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 - Pallet feeder with lift and transport Ncedpjwzvl Sofx Aflsw - 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002