CNC Lathe with c-axis DOOSAN - PUMA 700

DOOSAN Puma 700 M

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Max Tool Length: 400 mm Max Tool Weight: 12 kg Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Nodpsx Hfl Eofx Adwecl Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) 3D Cutter Compensation (G40-G42)

Condition: used, Year of construction: 2015, x-travel 1.200 mm y-travel 600 mm Nsdpfx Asx Ak Hdodwocl z-travel 675 mm Control C 620 HSCI FS table-size 1.220 x 620 mm 40 fach Distance between table and spindle 735 mm turning speeds 10.000 U/min spindle drive 18 kW Internal cooling system 30 bar -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED.

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Ncodpfx Asg Tzbwsdwjl Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Nedoxflxaepfx Adwocl Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Nodpfxew Rl S Se Adwscl Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min Ncjdpfx Adjw Ed Tfowsl c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Ncodpfxevxu Eaj Adwol Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Ncjdjlfil Sopfx Adwel Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Ncedpfx Aow Ucyusdwel Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Ncsdpfx Aow Awmtodwjl Spindle hours: