Mill with suction and metal detector

DREHER S 20/20 VS

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Nodpoukirbofx Adnodd

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) Nsdpjg Ezarjfx Adnsdd All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Ndedpfx Aju Itqdednod

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Ndsdpfxsghgl Io Adnsd Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Ndodpfsu Ttf Nsx Adned Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: good (used), Type Luxor LS80 Nedswalxljpfx Adnodd Series No. 08 020 044/07 0135 Dry air quantity 80 m³ /h Connected load Max 10.2 kW Heating power 6.5 kW

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Njdpfx Aewxvadsdnsdd Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device Ndodpfx Adjwpkfcenjd 8 free cooling circuits manually adjustable Position-regulated screw

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock) Nsdpfjrdgkcjx Adnjdd

Year of construction: 2000, condition: good (used), Used Granulator Brand Rapid Model 3560KB Main engine Ndjdsvxkayopfx Adnod Rotor length 450mm Rotor diameter 350mm blower Dq880H cyclone +conveyor brand BOFAB with metal decector brand Sesotec machine 100% working