Lead/traction spindle lathe

ELBERON GRC300X750

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Gbodpfjxf Ey Rjx Ab Aoi Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2009, condition: good (used), Load capacity: 30 t Gjdpfxeqiz N Rj Ab Aebi Fine lift Lifting height 9 meters

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 Gbsdpfxefibh Rs Ab Aji construction height 2630 mm weight of the machine ca. t Duplex / Free lift

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Gbsdpfx Aow Iq Ugsb Aoi Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Godpfx Abjw Sx Agj Aobi

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm Gsdpfx Abovzhf Se Aobi cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Gsdpjxpw Rvjfx Ab Aobi BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Gbjdpfx Aorz Tutsb Asi Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug Gjdpfxoga T Ans Ab Ajbi OPTIONS * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe Gedpfxstzf N Ro Ab Aobi -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg