Vertical turning center

EMAG VSC 250

Condition: used, Year of construction: 2015, Technical details: Hfsdpfjq Sc Huex Adwob turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm Hfjdpjfrvzvefx Adweb height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min Hedpfx Adoxvx T Sjwsfb * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Year of construction: 2015, condition: ready for operation (used), A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible. Hsdpfxex Dm Dzo Adwsfb

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL Hodpfx Asmv H Dxjdwefb C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Hfedjxl Ah Sjpfx Adweb

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Hodpfxjw Dyqdj Adwofb Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm Hsdpfx Ajd Sitkodwefb turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. Hodpfx Adotrwdtowefb The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. COTROL Siemens Powerline TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE power: 28 kW speed: max. 6000 rpm TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Hfsdpfoia Rtdsx Adwob Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Hjded I A Dhopfx Adwjfb Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Year of construction: 2014, condition: like new (used), machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Hedpfx Adsfyaaiewofb Control: Bosch Rexroth MTX

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, workpiece diameter (max.): 200 mm, workpiece height (max.): 150 mm, turning diameter over bed slide: 250 mm, The machine has been fully cleaned and newly painted! TECHNICAL DETAILS Machining Area Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm Axes X-axis travel: 685 mm Z-axis travel: 200 mm Main Spindle Main spindle power: 28 kW Main spindle speed: max. 6,000 rpm MACHINE DETAILS Control: Siemens Powerline Hodpfx Aew Hzupodwefb EQUIPMENT Round belt 1x disc turret, 12x D40

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Hedpfx Adod Tx Ahowjfb

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Hfjdpjwfgzlofx Adweb Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX