CNC turning and milling center

EMCO TURN 345

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m Bjdex Aq Hkepfx Afhecu greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 470 mm, travel distance Z-axis: 876 mm, spindle motor power: 30,000 W, spindle speed (max.): 1,250 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, turning diameter: 1,000 mm, total length: 2,375 mm, total height: 3,659 mm, total width: 4,558 mm, type of input current: three-phase, torque: 3,655 Nm, input voltage: 400 V, overall weight: 14,000 kg, Equipment: cooling unit, CNC Vertical lathe MAZAK Mega Turn 900 TECHNICAL CHARACTERISTICS: CNC control: MAZATROL SmoothG Bcedpjw T Tmpsfx Afhju Max. turning diameter: 920 [mm] Max. cutting diameter: 1000 [mm] Stroke X axis: 470 [mm] Stroke Z axis: 876 [mm] Rapid traverse rate X axis: 24000 [mm/min] Rapid traverse rate Y axis: 24000 [mm/min] Spindle nose: A2-15 Max. spindle speed: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Min. distance from spindle face to turret face: 154 [mm] Max. workpiece weight: 3000 [Kg] Max. distance from spindle face to turret face: 1030 [mm] Number of tool stations: 12 Turret indexing time: 0.4 [s/pos] Lubrication tank capacity: 516 [l] Total power required: 58.9 [kVA] Supply voltage: 400 [V] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 14000 [Kg] More information available upon request.

Condition: like new (used), Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 510 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, rotational speed (max.): 6,300 rpm, type of input current: three-phase, overall weight: 2,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in very good condition and immediately ready for use. The machine comes complete with various tools and driven tools, both axial and radial. Software: Sinumerik 810D/840D Turning. Full documentation is available and included. Bcodox Rqd Iepfx Afhsu

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, turning diameter over bed slide: 430 mm, workpiece length (max.): 510 mm, TECHNICAL DETAILS Turning diameter: 220 mm Turning length: 700 mm / 665 mm Swing diameter over bed: 430 mm Max. part length: 510 mm X-axis travel: 160 mm Bcsdpsxvrn Nefx Afheu Spindle bore diameter: 45 mm MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Required space approx.: 2.63 x 1.98 x 1.94 m Machine weight approx.: 2.6 t

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Bsdeia Rtdspfx Afhscu Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Bcedexmkcajpfx Afhsu

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total height: 1,940 mm, total length: 1,980 mm, total width: 2,630 mm, TECHNICAL DETAILS Working Area Swing diameter over bed: Ø430 mm Distance between centers with standard tailstock: 700 mm Maximum turning diameter: Ø220 mm Maximum workpiece length: 510 mm Maximum bar capacity: Ø45 mm Cross-slide travel X: 160 mm Cross-slide travel Z with manual tailstock: 310 mm Main Spindle Spindle mount according to DIN 55026: A5 Spindle outer diameter at front bearing: Ø80 mm Solid clamping cylinder with drawbar for chuck parts up to: Ø165 mm Hollow clamping cylinder with draw tube max. through-hole: Ø45 mm Maximum chuck size: Ø160 mm Main Spindle Drive AC motor, power (100% / 40% duty cycle) with integrated holding brake: 9 / 13 kW Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Rotary axis resolution: 0.001° Rapid traverse: 100 rpm Feed Drives AC motors for X and Z axis feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position scatter Ps according to VDI 3441 in X/Z: 3 / 5 µm Tool System Disk turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations: 12 Turret indexing time: 0.14 s Standard Tailstock Travel: 460 mm Quill stroke: 120 mm Bcodpowxw Aaofx Afhju Quill diameter: Ø60 mm Internal taper for live center: MT4 Quill thrust: 5,000 N MACHINE DETAILS Footprint: 2.63 m x 1.98 m x 1.94 m Space requirement: 3.0 x 1.92 m Height: 1.88 m Weight: 3.8 t

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: Bcodpfx Afjvr Eh Eehsu • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Bedov Uqcgjpfx Afhecu

Condition: new, 40000 kg length 8000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 9,9 x 3,0 x 0,9 m Bcjdpofrzwfofx Afheu Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.