ES TENNANT M20

ES TENNANT M20

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc Dsdorhig Ejpfx Ap Dewc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: as good as new (ex-display), Year of construction: 2026, -Usable internal dimensions: D=900mm H=580mm (other sizes available upon request) -Spraying pressure: 3.2 Bar -Basket load: 200kg -Tank volume: 130L -Standard accessories: • Oil skimmer • Pumping device • Frame, lid, and housing made of stainless steel Dsdpfef A D Itex Ap Djwc • Time-controlled electric steam extraction • Basket made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Beringer BPx5 Dodpfxswifmzo Ap Djwc Reconditioned, inspected, and serviced Two-sided mounting Side-hinged discharge door Ramp operation possible Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. We will gladly prepare an offer including delivery.

Condition: new, Hydraulic workshop press, LFSS, type DPM 1070/100 Technical specifications: Pressure: 100 t Stroke: 300 mm Table area: 1070 x 260 mm Distance between guide columns: 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Dwedpfxjgipile Ap Dsc Retraction speed: 10.0 mm/sec Motor power: 5.5 kW Machine weight: approx. 1400 kg Space required: approx. 2110 x 1000 x 2290 mm Equipment: Hydraulic workshop press Table height adjustment V-block tool insert Pressure gauge

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected Dedpfx Apogl Duzj Dswc -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2026, container length: 20 ft, overall weight: 30,400 kg, maximum load weight: 28,000 kg, empty load weight: 2,300 kg, loading space volume: 33 m³, loading space width: 2,350 mm, loading space length: 5,900 mm, loading space height: 2,390 mm, operating hours: 10 h, machine/vehicle number: 0000, 🚢 20-foot storage container – Like-new (manufactured in 2025 / 2026) – Available now! High-quality shipping container in near-new condition – perfect as a storage space, workshop, construction site container, or for professional transport. Dwjdpfxjwu Ul Ro Ap Djc ⭐ Your benefits at a glance 🆕 Manufactured in 2025 / 2026 – like new 💪 Very sturdy steel construction (2 mm wall thickness) 🌧️ Wind- and waterproof 🔐 Securely lockable with 4-point door bolt 🚚 With CSC plate – suitable for worldwide transport 🌬️ With ventilation to prevent moisture 🪵 High-quality wooden floor 🛠️ Forklift pockets in the floor 📏 Dimensions & technical data 📐 Exterior dimensions: 6,058 × 2,438 × 2,591 mm 📦 Interior dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Net weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, safety, and versatility—ideal for commercial use, construction sites, trades, or demanding private applications. 📬 Inquire now—we’ll provide you with a customized quote! 👀 Additional container sizes and variants available.

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! Dodpfx Apecl Sb Rs Dewc All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Dodpexpn Tnsfx Ap Djwc Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: good (used), Clean air extraction system Dsdpfx Asrb D Nep Dswc Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: used, Year of construction: 2001, Celaschi brand squaring machine, composed of 2 single-side machines (right + left), type TA, model 20-MCI, year 2001 (CE), with 2 milling groups per side, used. Workable piece size: min/max width: 60/160 mm Dwodpfek N I Nbex Ap Dec min/max length: 350/1400 mm min/max thickness: 13/23 mm