Diesel Tank Tank conditioning filling station

Year of construction

2011

Condition

Ex-display machine

Location

Germany

Diesel Tank Tank conditioning filling station

Machine data

Machine type:: Diesel Tank Tank conditioning filling station

Machine number:: 10.000 Ltr

Year of construction:: 2011

Condition:: as good as new (ex-display)

Price & Location

Location:: D - Nordrhein-Westfalen

Call

Details about the offer

Listing ID:: A2421820

Update:: 19.05.2026

Description

Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act

Dear Sir or Madam,

We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications:

Nominal capacity: 10 cbm
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL... as per your request.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate.

Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm).

Monitoring space of the double wall with leak detection fluid.

Container dimensions:
Length: approx. 5,350 mm plus 600 mm for diesel pump
Diameter: approx. 1,600 mm
Weight: approx. 2,000 kg

Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket.
- Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“)
- Suction pipe 1¼“
- Dipstick and dipstick closure – tank level indicator
- Vent pipe with cap 1 ½“
- Limit value sensor with type approval
- Leak detection device (optical) = LAS with leak detection fluid
- Access ladder for side mounting, supplied separately.

Tank approved for installation outside of earthquake/flood zones.

Diesel fuel dispenser with data recording
Type: HDM80eco LTE
Flow rate: 75 l/min
Cloud-based basic module free of charge
You can see who, when, where, and how much fuel was dispensed.
Fueling is done via tank key or PIN input.

Dispensing area/fueling station
Type: KAP system, galvanized
Area with ramps (mm): approx. 2,650 x 5,300
Area without ramps (mm): approx. 2,500 x 5,000
Pan height (mm): approx. 60
- Nationwide general building approval
- Approved for installation outdoors and in buildings
(For outdoor installation with folding cover and passing pipes)
- 2 collection basins, each with a volume of 150 liters.

=====
Pedocl Sb Ropfx Abhopu

Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees at our company.
We also offer affordable delivery upon request.
You can inspect our systems at any time.
Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises.
Have we convinced you of our offer?
If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the fuel station applies ex works Warstein, unloaded.
Delivery can be offered at a low cost for an additional charge.
Delivery time: upon agreement.
You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them.

Sincerely,
from Warstein
Tank & Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Rheinland-Pfalz

6,937 km

Vertical machining center
TakumiV18A

€8,500

To the auction

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Ppjdpfx Abozdpqwshou Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

See details

Listing

Jasło

5,964 km

CNC lathe
ColchesterTornado 200

€6,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 1995, TORNADO 200 year of manufacture 1995 GE FANUC Series O-T control system Ppodpoua Uyusfx Abhsu Maximum machining diameter: 254 mm Maximum turning length: 400 mm Axis travels X : 215 mm Z : 400 mm Maximum spindle speed: 3500 rpm Spindle motor power: 18.5 kW Konik Tool system : VDI 40 Tool head : 12 positions Dimensions of the machine length : 2455 mm width : 1420 mm weight : 3000 kg

See details

Auction

Hessen

6,882 km

Press brake
BoschertProfi 28 CNC

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Pjdpezdd Rgjfx Abhjpu Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

See details

Auction

Scribing and dot peen marking machine / Engraving machine Nill + Ritz TSM 15-10-UG

Hessen

6,882 km

Scribing and dot peen marking machine / Engraving machine
Nill + RitzTSM 15-10-UG

€2,500

To the auction

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm CNC engraving and embossing machine – TSM series Pedpezddzrefx Abhjpu Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

See details

Listing

50.000 liter fuel oil tank / oil tank BARTH

Forst

6,887 km

50.000 liter fuel oil tank / oil tank
BARTH

Call

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - 3" filling pipe with TW coupling - 1" sounding pipe with sounding rod - Euroflex 3 suction combination (max. 150 l/h) - 1 2" vent with vent cap. The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be repainted in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers are possible, please contact us for this. Delivery time by arrangement! We also have these types of tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Pjdpfxshvmitj Abhopu Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

See details

Auction

Hessen

6,882 km

Engraving machine
RichterPGM 500

€2,000

To the auction

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Psdpfx Abjzddwmehspu Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Reinforced base frame Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

See details

Auction

Endogas generator Hammer GmbH Larus Endogas Generator

Hessen

6,882 km

Endogas generator
Hammer GmbHLarus Endogas Generator

€10,000

To the auction

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l Ppjdpfx Aszddb Esbhou EQUIPMENT Dew point or cp control Soot filter in duplex version Fully automatic power control in the range of 50-100%

See details

Listing

80,000 liter diesel tank / heating oil tank BARTH

Forst

6,887 km

80,000 liter diesel tank / heating oil tank
BARTH

Call

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - Filling pipe 3" with TW closure - Gauge pipe 1" with gauge rod - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent connection 2" with vent cap. The tank is factory-equipped with the above-mentioned fittings and is cleaned internally. Capacity: 80,000 liters Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg The tank can be repainted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 Ppedpfohvidgox Abheu 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

See details

Auction

Cylindrical grinding machine Kellenberger KEL-VISION

Baden-Württemberg

6,870 km

Cylindrical grinding machine
KellenbergerKEL-VISION

€25,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Ppodpezcwfuofx Abheu Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

See details

Auction

Cylindrical grinding machine KELLENBERGER 1000 U

Baden-Württemberg

6,870 km

Cylindrical grinding machine
KELLENBERGER1000 U

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Psdpfxozcwfno Abhspu Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

See details

Listing

Shipping container CIMC 40 ft container 40 piedi

Romanore

6,720 km

Shipping container
CIMC 40 ft container40 piedi

€1,900

ONO plus VAT

Call

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER Ppsderk Eqvjpfx Abhju CSC VALID MARCH 24 SEALING IN WORKING CONDITION 2 UNITS AVAILABLE

See details

Auction

Rheinland-Pfalz

6,957 km

Vertical machining center
HAASVF-7/40

€17,000

To the auction

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Ppedpozg Drzofx Abheu Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

See details

Auction

Travelling column milling machine ANAYAK HVM 3300

Rheinland-Pfalz

6,957 km

Travelling column milling machine
ANAYAKHVM 3300

€25,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Ppedpfx Aozg Dq Dobheu Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

See details

Listing

Diesel Tank Tank System Wozniack Dieseltank Heizöltank

Germany

6,955 km

Diesel Tank Tank System
WozniackDieseltank Heizöltank

Call

Condition: used, Year of construction: 2012, machine/vehicle number: DK25P, Dear Sir or Madam, We offer the following: Nominal capacity: 20 m³ Used, refurbished (ground, primed, and painted according to customer's color choice) Includes manufacturer's/test certificate DIN 6616-D. Material: S235JRG2 steel in steel Double-walled tank for above-ground installation, suitable for locations outside earthquake/flood zones. Shape: cylindrical, with saddle supports Tank dimensions: Length: approx. 6,840 mm, Diameter: approx. 2,000 mm, Weight: approx. 3,500 kg Color: RAL paint, according to customer's specifications Equipment: - Filling pipe 3" with TW closure (filling cap) - Suction pipe 1 ¼" - Dipstick and dipstick closure, tank content indicator - Vent with cap 1 ½" - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Diesel pump Cube 70 70 l/min Delivery hose 4 m / extendable Motor: 0.5 kW, 230 V, 4.2 A Includes tank support, pipelines, ball valve and non-return valve, installed. Optional: 80 l/min diesel fuel dispenser with data recording Ppsdpfecl Sfbex Abheu +++++ Of course, you can also customize your tank system! We will gladly implement your color and equipment preferences to the best of our ability. All our systems are extensively inspected and checked by selected employees in our company. We also offer an affordable delivery service upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Sincerely, from Warstein Tank & Environmental Protection Wozniack

See details

Auction

Baden-Württemberg

6,869 km

Cutting Mill
GetechaRS 600

€10,000

To the auction

Condition: ready for operation (used), functionality: fully functional, power: 30 kW (40.79 HP), filling opening length: 600 mm, filling opening width: 500 mm, rotor diameter: 400 mm, rotor width: 600 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been completely overhauled! Robust shredding mill with high performance! TECHNICAL DETAILS Psdpfozdf Dnox Abhepu Number of rotor blades: 5 Number of stator blades: 2 Rotor width: 600 mm Rotor diameter: 400 mm Infeed opening (W x L): 500 x 600 mm MACHINE DETAILS Drive power: 30 kW Suitable for: Plastics processing, recycling, and material recovery The screen size can be adjusted to customer requirements.

See details

Advertise here