Manual Cabin High Pressure Washers

EVEREST MSP Manual Hand Spray Systems

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Iodpfsh Hxubex Ab Ioa Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Isdeq Ttz Eopfx Ab Isa

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Iedpfxjd Ixbzo Ab Iea OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformers manufactured by SEA Italy, 2 pcs 800kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, warranty. Ijdpsndn Hrjfx Ab Iea

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle Iedpfx Absgvaaze Ioa - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformers manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1or5or11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Iodel Tm Uvspfx Ab Iea

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg Iedpfx Abehl H Uuj Ija - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Iedpfxofp A I Eo Ab Isa Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Iodpfxehl Ifzs Ab Ioa Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. Iodpfx Abe T D R De Iea - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation