Used Paper wrapping machines for sale (10)

Condition: ready for operation (used), LCR Mod. QUARK Automatic Nr. 4 cardboard stations without roll Different sizes and thicknesses Ielhccowhbqtjqkoau Year 2006 By entering the piece sizes in the command, the machine calls the most suitable program The command works with programs defined by the customer “including protections” Based on the program, the machine automatically calls the most suitable cardboard size In essence, use is automatic but the start is always given by the size of the piece indicated by the operator The machine with 6 independent axes Maximum useful dimensions in width 2400 mm Minimum useful dimensions in length 450 mm Minimum useful dimensions in width approximately 200 mm Panel power 3.5 kw Total length 11,400 mm + support surface at machine exit Max. width 3,199 mm Separate control panel

Condition: new, Year of construction: 2025, Functionality: fully functional, working width: 2,800 mm, stack height: 1,400 mm, Think Green, Box On Demand, Mind Your Carbon Footprint, Fanfoald The machine listed here for converting continuous corrugated board belongs to the static machine series, meaning that the cross-cutting operations are performed on the upright carton. The machine is designed for high productivity. The maximum working width of the carton is 2,800 mm. Iaolhccqsv Uyw Tekeu All tool adjustments are performed automatically. 1) Main machine body (carton cutting machine): Linear cross-cutting unit for the head-to-toe cut and the cross-cuts on the carton. Linear cross-creasing unit for the cross-creases on the carton. (Supplied as a cross-creaser, cross-creaser with perforation) 12 longitudinal creasing groups from above for longitudinal creasing on the cardboard 12 longitudinal cutting groups for longitudinal cutting 2) Carton changer, 4-way cassette feed The motor-driven carton changer with a lifting axis enables the cardboard feed into the carton feeder of the main machine body with 4 individual cassettes. Each cassette, with a width of max. 2800 mm, is capable of holding web-wide raw material and automatically feeding it to the main machine body upon request from the machine control system. 3) 5-way carton magazines 5 carton magazines ensure the provision and feeding of the raw cardboard to the processing machine. Stacking height of continuous corrugated cardboard up to 1,500 mm is possible. 4) Control cabinet, control system, electronics: Contains all components required to operate and control the system. Control cabinet components are based on Siemens.

Condition: used, Year of construction: 2006, Functionality: fully functional, working width: 3,000 mm, stack height: 1,800 mm, Visible in production until the end of July 2025. It will be dismantled in August. Originally purchased in Italy at the end of 2020. After a full renovation, it started production in 2023. The machine is in very good condition. It is being offered for sale because it will not be compatible with a new production line currently being installed. This model is designed to work with bottom printing systems. Previously operated with a Curioni 2800 rotary printer, and currently works with a Curioni 2200NT Casemaker. Islhcswdxdvecqkjau More pictures and movie on demand email/signal/whatsup

Condition: like new (used), Year of construction: 2007, Available immediately! Best price now! CYKLOP CI 1110M Wrapper-cover machine, 2007 for sale TECHNICAL DATA MACHINE Nominal speed rotary-arm 10-25 r.p.m. Maximum speed rotary arm 25 r.p.m. Capacity max. 58 pallets/h Operational hours 24 hrs/day, 5 days/week Free headroom min of 5000 mm Total weight (incl. Safety fences) approx. 1000 kg Building height transport system 300 mm Environmental temperature +5 to +35 °C Environment clean, dry ELECTRICAL Power supply 3x600V/50 Hz Control voltage 24 V DC Installed power approx. 9.4 kVA Protection class Control unit IP 55 Motors IP 54 Switching materials IP 65 PNEUMATICS Ielhccei Apkxeqkjau Operating pressure min. 6 Bar Air consumption 1000 l/hr at 6 Bar and 60 pallets/hr PALLET Pallet dimensions Length x width x height Max. 2000 x 800 x 145 mm Min. 1200 x 800 x 145 mm Height with load (including pallet) max. 1200 mm / 1500 kg Min. 500 mm / 200 kg Top of load flat Art of load furniture parts on pallet FILM Film roll cross section max. 300mm Cartridge cross-section 76.2 mm Width max. 600mm Thickness 17 – 23 Film cutting system Pneumatic linear drive, separating knife, film cutting at bottom. Film carriage Frequency-controlled drive for different overflap patterns Film stretching infinitely from 0% to 300% Sound level max 80 dBA , min 70 dBA Sound level during wrapping is dependent on the film which is used. All technical documentation available.

Condition: reconditioned (used), Functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra Iolowcnqcshccqkeau 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone re price negotiations

Condition: good (used), Year of construction: 2005, machine/vehicle number: CS 500/60 Nr. 2974, KORA PACKMAT CARD SEAL 500/60 year 2005 + VRM 30 year 2000 Ielhccqerqhkvoksau Machine for card packaging

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, 5 x ROBOTAPE 50 TBDA W=135 mm from ROBOPAC, year of manufacture 2019, is a semi-automatic gluing machine for closing and gluing the flaps of cardboard boxes of various formats with adhesive tape from the top and bottom. The possibility of sale also in pieces. Iajlhjvhcdpoccqkou PRINCIPLE OF OPERATION: After placing the box, a pneumatic valve detects the presence of the box and authorizes the closing of the centering unit, which locks the box in the center of the machine. After filling the box, the operator closes the upper balls with a sensor and lifts the upper means of transport.2.After the transport stops, the operator moves the box forward. The upper conveyor only lightly rests on the box, and therefore the machine performs automatic taping as the box moves. After finishing the taping phase, the operator unloads the box and the centering unit and the upper means of transport return to the starting position. The cycle is finished and the machine is ready to start a new cycle.

Condition: used, Year of construction: 2023, Functionality: fully functional, Think Green, Box On Demand, Mind Your Carbon Footprint, Fanfoald Vision 2800 Automatic Carton Machine for processing continuous cardboard from the stack, also suitable for single-sheet feeding Machine Description: The machine listed here belongs to the static machine series, meaning that the cross-machine operations are performed on the upright carton. The machine is designed for high productivity. The maximum working width of the carton is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (automatic carton cutting machine): Islhowb Utzjccqkoau Linear cross-cutting unit for the head-to-toe cut and the cross-cuts on the carton. Linear cross-creasing unit for the cross-creases on the carton. (Supplied as a cross-creaser, cross-creaser with perforation) Longitudinal creasing groups from above for longitudinal creasing on the cardboard. Longitudinal cutting groups for longitudinal cutting. 2) Double cardboard magazines Two cardboard magazines ensure the provision and feeding of the raw cardboard to the processing machine. Stack height of continuous corrugated cardboard up to a maximum of 2,200 mm is possible. 3) Control cabinet, control system, electronics: Contains all components required to operate and control the system. Control cabinet components are based on Siemens. The machine will be available in July 2025 and will then be available for sale.

Condition: as good as new (ex-display), Year of construction: 2005, Functionality: fully functional, Wellmatic packaging machine (as good as new) for books, brochures, CDs, DVDs, catalogs, spare parts etc.. Using self-adhesive corrugated cardboard rolls. The package length is automatically adjusted to the product length, which is measured electronically at the infeed. The Wellmatic's maximum output of up to 35 parcels per minute depends on additional equipment such as product inserters, labelers, personnel and product type. The machine was only used by Dostal Maschinenbau GmbH for demonstration purposes and therefore has a very short running time. With Siemens Simatic OP7 (7-DP) operating panel, Simatic S7-300 control system, 2 Lenze Profibus-DP frequency inverters. Automatic and manual operation is possible. Outfeed conveyor: length 1,400 mm, working height 920 mm. Infeed conveyor: length 1,070 mm, working height adjustable from 940 - 985 mm; max. package/roll width: 450 mm; max. package thickness: 75 mm; max. product width approx. 350 mm. Ielhccst S Nr Reqkjau The machine has a transportable, removable base frame with a height of 160 mm (in addition to the specified working height). Prices: ex works, without packaging, without assembly

Condition: good (used), Functionality: fully functional, Year of construction: 2008, Multiflex carton machine, no Panotec / Packsize Think Green, Box On Demand, pay attention to your CO2 footprint, Fanfoald For processing continuous cardboard from the stack The following language options are available: German English Italian Machine Description: Iajlhccjwkrn Ujqkju The machine listed here belongs to the static machine series, i.e., the cross-machine operations are performed on the upright carton. The machine is designed for high productivity. The maximum working width of the carton is 2,400 mm. All tool settings are performed automatically. 1) Main machine body (automatic die-cutter) 1 linear cross-cutting unit for the head-to-toe cut and the cross-cuts on the carton blank. The axis features two permanently installed parallel cutting units (75 mm) to increase performance. 1 Linear cross-crease group for cross-creasing the cardboard. Integrated cross-perforation supports cross-creasing on the blank and ensures better handling during manual packaging. 8 longitudinal crease groups for longitudinal crease on the cardboard in the flow direction. A counter-tool located underneath serves as a counterpart to the creasing. Longitudinal creasing tools are equipped with perforation groups. 12 longitudinal cutting groups for executing the longitudinal cuts. Two are used for outer trimming, and two are additional separating devices. 2) Carton changing device The carton changing device has five carton conveyor systems for continuous cardboard. The individual magazines are controlled via the machine control system. 3) Carton magazines (raw material continuous cardboard) Five carton magazines ensure the provision and feeding of the raw cardboard to the processing machine. Stack height 2200 mm 4) Control cabinet, control system, electronics Contains all components required to operate and control the system. PLC and control cabinet components are based on Siemens. System description of the control system: The machine control system used here enables simple and effective dialogue between the operator and the machine. The connection to the machine PLC is established via a PC using a graphic interface in conjunction with a monitor.